[1] |
陶骙, 邵艳坡, 吴恒, 等. 室外换热器可变流路设计及试验分析[J]. 流体机械, 2024, 52(02): 8-15+47.
|
[2] |
蒋骏, 王飞, 丁爽, 等. 冷热两用换热器流路可变技术在空调R290产品上的应用[A]// 中国家用电器协会. 2023年中国家用电器技术大会论文集[C], 2023: 9.
|
[3] |
于永全, 李日新, 蔡国健, 等. 基于可变分流设计的R32空调系统性能提升研究[A]// 中国家用电器协会. 2022年中国家用电器技术大会论文集[C], 2023: 6.
|
[4] |
刘君康, 王宏超, 熊通, 等. 热泵空调翅片管换热器流路优化研究进展[J]. 化工进展, 2023, 42(01): 107-117.
|
[5] |
曾淑剑. 房间空调器之室外机冷凝器最优流路设计[J]. 家电科技, 2017(05): 50-53.
|
[6] |
杨珊珊. 流程布置对管翅式冷凝器换热性能影响的研究[D]. 镇江: 江苏科技大学, 2017.
|
[7] |
于永全. 室外机换热器翅片片型对空调性能的实验研究[J]. 家电科技, 2022(zk): 386-388.
|
[8] |
孙建平, 李业雄, 张亮. 翅片侧换热效率强化对整机的影响研究[J]. 家电科技, 2022(zk): 314-317
|
[9] |
赵夫峰. 翅片厚度对翅片管换热器性能影响的分析[J]. 制冷技术, 2017, 37(01): 61-66.
|
[10] |
宋军军, 蔡家斌, 李家春. 翅片管蒸发器传热性能的参数灵敏度分析[J/OL]. 机械设计与制造: 2024(08): 388-391.
|
[11] |
沃龙. 空调换热器管型及翅片优化研究[D]. 北京: 北京建筑大学, 2023.
|
[12] |
吴嘉丰, 刘志春, 刘伟. 百叶窗翅片管传热流动特性数值模拟与优化设计[J]. 工程热物理学报, 2021, 42(07): 1821-1826.
|
[13] |
杨倬. 管翅式换热器内空气侧流动数值模拟、优化设计与实验研究[D]. 杭州: 浙江大学, 2020.
|
[14] |
刘妮, 李欢, 单小丰, 等. 百叶窗翅片管换热器空气侧传热和流动特性数值模拟[J]. 热能动力工程, 2021, 36(06): 70-77.
|
[15] |
王磊. 铜管管径对翅片管式冷凝器性能和经济性的影响[J]. 制冷与空调, 2019, 19(12): 34-38.
|
[16] |
高原, 吴扬, 米丽娟, 等. 紧凑式换热器在空调系统中的应用[A]// 国家节能环保制冷设备工程技术研究中心(CNERCGRE). 2010年国际制冷技术交流会论文集[C], 2010: 181-184.
|
[17] |
康盈, 柳建华, 张良, 等. 微通道换热器的研究进展及其应用前景[J]. 低温与超导, 2012, 40(06): 45-48.
|
[18] |
丁国良, 吴国明, 刘挺. 制冷空调换热器的研究进展(一)——小管径翅片管换热器[J]. 家电科技, 2019(04): 40-45+58.
|
[19] |
江俊, 张伟伟, 宋晓. 5 mm管径铜管换热器在商用空调机组上的应用研究[J]. 制冷与空调, 2016, 16(12): 87-91.
|
[20] |
杨丁丁, 柳建华, 宋吉, 等. 小管径内螺纹铜管在空调换热器上的应用分析[J]. 有色金属材料与工程, 2017, 38(06): 334-338.
|
[21] |
吴极, 王瑾, 王哲旻, 等. 管径变化对蒸发器性能影响的仿真与实验研究[J]. 制冷学报, 2015, 36(06): 104-110.
|
[22] |
洪晓强. 不同管径内螺纹管蒸发换热研究[D]. 杭州: 浙江大学, 2018.
|
[23] |
赵定乾. 小管径空调换热器的流路设计和分流器开发[D]. 上海: 上海交通大学, 2019.
|
[24] |
熊通, 晏刚, 樊超超. 微通道换热器两相流分布研究现状与展望[J]. 制冷学报, 2021, 42(01): 23-35.
|
[25] |
王顺. 微小通道两相流换热器分液均匀性研究[D]. 杭州: 浙江大学, 2021.
|
[26] |
欧雍若, 王风磊, 李文辰, 等. 微通道热交换器研究进展[J]. 石油化工设备, 2020, 49(06): 39-46.
|
[27] |
Park C Y, Hrnjak P.Experimental and numerical study on microchannel and round-tube condensers in a R410A residential air-conditioning system[J]. International journal of refrigeration, 2008, 31(05): 822-831.
|
[28] |
Aljubury I M A, Mohammed M A. Heat Transfer Analysis of Conventional Round Tube and Microchannel Condensers in Automotive Air Conditioning System[J]. Journal of Engineering, 2019, 25(02): 38-56.
|
[29] |
Nasrazadani S, Nakka S.Characterization of corrosion products in RTPF and all-aluminum microchannel heat exchangers[J]. Journal of Failure Analysis and Prevention, 2016, 16: 189-196.
|
[30] |
Shah M M.Comprehensive correlations for heat transfer during condensation in conventional and mini/micro channels in all orientations[J]. International journal of refrigeration, 2016, 67: 22-41.
|
[31] |
Xu Y, Fang X.A new correlation of two-phase frictional pressure drop for condensing flow in pipes[J]. Nuclear Engineering and Design, 2013, 263: 87-96.
|
[32] |
Shah M M.Unified correlation for heat transfer during boiling in plain mini/micro and conventional channels[J]. International journal of refrigeration, 2017, 74: 606-626.
|
[33] |
Didi M B O, Kattan N, Thome J R. Prediction of two-phase pressure gradients of refrigerants in horizontal tubes[J]. International Journal of refrigeration, 2002, 25(07): 935-947.
|
[34] |
Gnielinski V.New equations for heat and mass transfer in the turbulent flow in pipes and channels[J]. NASA STI/recon technical report A, 1975, 41(01): 8-16.
|
[35] |
P. R. H.Blasius, VDI Wärmeatlas, 9th Edition, Springer-Verlag, Ch. Lab., 2002.
|