家电科技 ›› 2018, Vol. 0 ›› Issue (9): 58-61.

• 论文 • 上一篇    下一篇

IEC 61347-1:2007与IEC 61347-1:2015标准部分差异分析

甄宝华1, 李婷婷1, 周传剑2   

  1. 1.中家院(北京)检测认证有限公司 北京 100176;
    2.滁州市技术监督检测中心 安徽滁州 239000
  • 出版日期:2018-09-01 发布日期:2019-07-12

Analysis of the differences between IEC61347-1:2007 and IEC 61347-1:2015

ZHEN Baohua1, LI Tingting1, ZHOU Chuanjian2   

  1. 1. CHEARI (Beijing) Certification & Testing Co., Ltd Beijing 100176;
    2. Chuzhou Technical Supervision and Testing Center Chuzhou 239000
  • Online:2018-09-01 Published:2019-07-12

摘要: IEC 61347-1:2015于2015年2月已经颁布实施,该版标准相较于2007版标准补充了一些测试要求。本文着重对比了两版标准之间的差异,并对其进行简单分析。旨在使相关设计人员与检测人员快速了解这些变动,同时为今后的设计及检测工作提供一种新方向。

关键词: 接地, 故障状态, 爬电距离, 电气间隙

Abstract: IEC 61347-1:2015 has been implemented in February 2015, the version of the standard supplements some test requirements. This article focuses on the differences between the two versions of the standard and makes a simple analysis. Designed to enable relevant designers and inspectors to quickly understand these changes while providing a new direction for future design and inspection work.

Key words: Earthing, Fault conditions, Creepage distances, Clearances