家电科技 ›› 2019, Vol. 0 ›› Issue (3): 54-57.doi: 10.19784/j.cnki.issn1672-0172.2019.01.005

• 论文 • 上一篇    下一篇

动磁铁与动铁芯燃气比例阀出气压力的研究

刘桦   

  1. 广东万和热能科技有限公司 广东佛山 528300
  • 出版日期:2019-06-01 发布日期:2019-07-03

Study on outlet pressure of moving magnet and moving iron core gas ratio control valve

LIU Hua   

  1. Guangdong VANWARD thermo technology CO.,Ltd. Foshan 528300
  • Online:2019-06-01 Published:2019-07-03

摘要: 本文研究了铁芯往外移动距离和弹簧劲度系数对动磁铁燃气比例阀出气压力的影响,螺母往外移动距离和弹簧劲度系数对动铁芯燃气比例阀出气压力的影响。结果表明:动磁铁燃气比例阀在低负荷工作状态下的出气压力随铁芯往外移动距离增加而变大,变化明显,对高负荷工作状态出气压力几乎无影响;动铁芯燃气比例阀在低负荷和高负荷工作状态的出气压力均随螺母往外移动距离增加而减小,变化量一致;燃气比例阀在低负荷工作状态的出气压力不变时,动磁铁燃气比例阀在高负荷工作状态的出气压力随弹簧劲度系数增加而减小,动铁芯燃气比例阀在高负荷工作状态的出气压力随弹簧劲度系数增加保持不变。

关键词: 燃气比例阀, 出气压力, 动磁铁, 动铁芯

Abstract: The influence of the distance that the iron core moves outward and stiffness coefficient of spring on the outlet pressure of the moving magnet gas ratio control valve, and the distance that the nut moves outward and stiffness coefficient of spring on the outlet pressure of the moving iron core gas ratio control valve was studied. The results showed, the outlet pressure of moving magnet gas ratio control valve under the low load working state increases obviously with the distance the core moves outward, but the outlet pressure under the high load working state has almost no influence. The outlet pressure of moving iron core gas ratio control valve under low load and high load working state decreases with the distance that the nut moves outward, and the variation is consistent. When the outlet pressure of the gas ratio control valve under the low load working state keeps the same, the outlet pressure of moving magnet gas ratio control valve under the high load working state decreases with the stiffness coefficient of spring, the outlet pressure of the moving iron core gas ratio control valve under the high load working state remains when the stiffness coefficient of spring increases.

Key words: Gas ratio control valve, Outlet pressure, Moving magnet, Moving iron core