制冷空调换热器的研究进展（二）——紧凑式换热器

doi:10.19784/j.cnki.issn1672-0172.2019.05.001

家电科技 ›› 2019, Vol. 0 ›› Issue (5): 38-46.doi: 10.19784/j.cnki.issn1672-0172.2019.05.001

制冷空调换热器的研究进展（二）——紧凑式换热器

丁国良¹, 庄大伟¹, 李智强¹, 谢丽懿¹, 韩维哲², 魏文建³

1.上海交通大学制冷与低温工程研究所上海 200240;
2.江苏唯益换热器有限公司江苏丹阳 212311;
3.浙江盾安热工科技有限公司浙江诸暨 811835

出版日期:2019-10-01 发布日期:2019-10-23
作者简介:丁国良,glding@sjtu.edu.cn

Development of heat exchanger for refrigeration and air-conditioning (2) — compact heat exchangers

DING Guoliang¹, ZHUANG Dawei¹, LI Zhiqiang¹, XIE Liyi¹, HAN Weizhe², WEI Wenjian³

1.Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University Shanghai 200240;
2.Jiangsu Weyee heat exchanger Co., Ltd. Jiangsu 212311;
3.Zhejiang DunAn Thermal-Tech Co., Ltd. Zhejiang 811835

Online:2019-10-01 Published:2019-10-23

摘要/Abstract

摘要： 紧凑式换热器的应用,有利于减少制冷空调装置的体积、提升性能。本文的目的是总结具有代表性的几种紧凑式换热器的发展动态。本文介绍了板式换热器的研究进展,包括新型高效板片结构的开发、新型流路的设计以及作为经济器的应用。介绍了印刷板路换热器主要研究进展,包括制作工艺、流道设计及换热阻力特性等。介绍了插片式微通道换热器的结构特点,以及相比于常规微通道换热器的性能优势。还介绍了微管通道换热器的结构特点,以及适合的应用场合。

关键词: 紧凑式热交换器, 板式换热器, 印刷板路换热器, 微通道换热器, 微管通道换热器

Abstract: Application of compact heat exchangers in refrigeration and air conditioning appliances are beneficial to reduce the sizes and to improve the performances. The objective of this paper is to summarize the recent developments of the following typical compact heat exchangers. The introduction to plate heat exchangers covers the advances in high efficient plate type, new flow channel, and their usages as economizers. The introduction to printed circuit heat exchangers covers the manufacturing method, flow channel design as well as the heat and flow characteristics. The illustration on the insert-plate microchannel heat exchanger covers the structure as well as its performance advantages over conventional microchannel heat exchangers. The structure and application fields of micro bare-tube heat exchanger is also introduced.

Key words: Compact heat exchanger, Plate heat exchanger, Printed circuit heat exchanger, Micro-channel heat exchanger, Micro bare-tube heat exchanger

丁国良, 庄大伟, 李智强, 谢丽懿, 韩维哲, 魏文建. 制冷空调换热器的研究进展（二）——紧凑式换热器[J]. 家电科技, 2019, 0(5): 38-46.

DING Guoliang, ZHUANG Dawei, LI Zhiqiang, XIE Liyi, HAN Weizhe, WEI Wenjian. Development of heat exchanger for refrigeration and air-conditioning (2) — compact heat exchangers[J]. Journal of Appliance Science & Technology, 2019, 0(5): 38-46.

参考文献 19

[1]	Abu-Khader M M. Plate heat exchangers: Recent advances[J]. Renewable and Sustainable Energy Reviews, 2012, 16(4): 1883-1891.
[2]	伍肇梅, 黄余分, 胡伟, 等. 一种新型板式换热器[J]. 制冷与空调, 2011, 4: 100-102.
[3]	魏文建, 李华. 点波板式换热器内流体流动换热及压降特性的实验研究[J]. 制冷技术, 2012(4): 36-41.
[4]	Khan T S, Khan M S, Chyu M C, Ayub Z H.Experimental investigation of single phase convective heat transfer coefficient in a corrugated plate heat exchanger for multiple plate configurations[J]. Applied Thermal Engineering, 2010, 30(8): 1058-1065.
[5]	方贵银, 徐锡斌. 大过冷度逆流式过冷器换热特性研究[J]. 建筑热能通风空调, 2002, 21(4).
[6]	郝玉影, 吴兆林, 唐华杰. 带经济器涡旋压缩机系统的研究[J]. 制冷, 2009, 28(3):14-18.
[7]	王康硕, 任滔, 丁国良, et al.浮式液化天然气用印刷板路换热器研究和应用进展[J]. 制冷学报, 2016, 37(2):70-77.
[8]	Heatric PCHE Homepage [EB/OL]. (2015-01-01) [2015-08-28]. https://www.heatric.com/heat-exchangers/features/.
[9]	Wang X, Zhang N .Numerical analysis of heat transfer in pulsating turbulent flow in a pipe[J]. International Journal of Heat and Mass Transfer, 2005, 48(19-20):3957-3970.
[10]	Tsuzuki N, Kato Y, Ishiduka T .High performance printed circuit heat exchanger[J]. Applied Thermal Engineering, 2007, 27(10):1702-1707.
[11]	Hu H, Yang G, Ding G, et al.Heat transfer characteristics of mixed hydrocarbon refrigerant flow condensation in shell side of helically baffled shell-and-tube heat exchanger[J]. Applied Thermal Engineering, 2018, 133.
[12]	Kim T H, Kwon J G, Yoon S H, et al.Numerical analysis of air-foil shaped fin performance in printed circuit heat exchanger in a supercritical carbon dioxide power cycle[J]. Nuclear Engineering and Design, 2015, 288:110-118.
[13]	Jeon S, Baik Y J, Byon C, et al.Thermal performance of heterogeneous PCHE for supercritical CO2 energy cycle[J]. International Journal of Heat and Mass Transfer, 2016, 102:867-876.
[14]	Ngo T L, Kato Y, Nikitin K, et al.New printed circuit heat exchanger with S-shaped fins for hot water supplier[J]. Bulletin of the Research Laboratory for Nuclear Reactors, 2006, 30(8):811-819.
[15]	Kim D E, Kim M H, Cha J E, et al.Numerical investigation on thermal-hydraulic performance of new printed circuit heat exchanger model[J]. Nuclear Engineering & Design, 2008, 238(12):3269-3276.
[16]	Chu W X, Li X H, Ma T, et al.Study on hydraulic and thermal performance of printed circuit heat transfer surface with distributed airfoil fins[J]. Applied Thermal Engineering, 2017, 114:1309-1318.
[17]	葛洋, 姜未汀. 微通道换热器的研究及应用现状[J]. 化工进展, 2016, 35(s1):10-15.
[18]	江苏科菱库精工科技有限公司. 新型微通道冷暖两用热交换器:中国, 2017100975062 [P].2017-02-22.
[19]	Wenjie Zhou, Zhihua Gan.A potential approach for reducing the R290 charge in air conditioners and heat pumps[J]. International Journal of Refrigeration, 2019,101:47-55.

制冷空调换热器的研究进展（二）——紧凑式换热器

Development of heat exchanger for refrigeration and air-conditioning (2) — compact heat exchangers

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献 19

相关文章 0

Metrics

本文评价

推荐阅读 10