家电科技 ›› 2021, Vol. 0 ›› Issue (4): 98-101.doi: 10.19784/j.cnki.issn1672-0172.2021.04.020

• 论文 • 上一篇    下一篇

磁悬浮辅助轴承用双层滚珠轴承性能分析

李欣1,2, 龚高1,2   

  1. 1.广东省高速节能电机系统企业重点实验室 广东珠海 519070;
    2.珠海格力电器股份有限公司 广东珠海 519070
  • 出版日期:2021-08-01 发布日期:2021-08-09
  • 作者简介:李欣,学士。研究方向:从事磁悬浮轴承结构设计及转子动力学研究。地址:广东省珠海市。E-mail:xin0919@foxmail.com。

Performance analysis of double-decker ball bearing as backup bearing for magnetic bearing

LI Xin1,2, GONG Gao1,2   

  1. 1. Guangdong Provincial Key Laboratory of High-speed and Energy Conservation Motor System Zhuhai 519070;
    2. GREE Electric Appliances Inc. of Zhuhai Zhuhai 519070
  • Online:2021-08-01 Published:2021-08-09

摘要: 磁悬浮轴承常应用于高速工况,传统滚珠轴承的极限转速较低,成为制约其作为辅助轴承可靠性的关键因素,而采用双层轴承将有效提高轴承的极限转速。以单层混合陶瓷球轴承为对象,分析磁悬浮轴承失电后高速转子跌落至辅助轴承后的动力学过程,得到轴承转速变化规律;进而研究双层轴承相较于单层轴承的转速分配情况,分析其转速提升情况。通过对双层轴承的性能分析,为后续高可靠性的磁悬浮辅助轴承的设计提供参考。

关键词: 磁悬浮轴承, 辅助轴承, 双层滚珠轴承, 动力学分析, 转速分析

Abstract: Magnetic bearings are often used in high-speed occasions. The limit speed of traditional ball bearings is low, which becomes the key factor restricting its reliability as a backup bearing. Taking the single-decker hybrid ceramic ball bearing as the object, the dynamic process of the high-speed rotor dropping to the backup bearing after the loss of power of the magnetic bearing is analyzed, and the change law of the bearing speed is obtained; then, the speed distribution of the double-decker bearing is studied compared with the single-decker bearing, and the speed improvement is analyzed. Through the performance analysis of the double-decker bearing, it provides a reference for the design of high reliability backup bearing for magnetic bearing system.

Key words: Magnetic bearing, Backup bearing, Double-decker ball bearing, Dynamic analysis, Rotational speed analysis

中图分类号: