制冷设备洛克环连接强度仿真分析

家电科技 ›› 2018, Vol. 0 ›› Issue (5): 63-65.

制冷设备洛克环连接强度仿真分析

刘显威, 肖肖, 陈子雄, 刘国虬, 李游

广东美的制冷设备有限公司广东顺德 528311

出版日期:2018-05-01 发布日期:2019-07-16
作者简介:刘显威,liuxw6@midea.com

Simulation analysis on the bonding strength of Lokring Ring in refrigeration equipment

LIU Xianwei, XIAO Xiao, CHEN Zhixiong, LIU Guoqiong, LI You

Guangdong Midea Refrigeration Equipment Co., ltd. Shunde 528311

Online:2018-05-01 Published:2019-07-16

摘要/Abstract

摘要： 洛克环是一种高效、可靠的管件连接技术,目前制冷行业中已经完全取代传统的氩弧焊与电阻焊技术。本文通过CAE仿真技术模拟洛克环连接铜管工艺,在18.6MPa和6.3MPa静压工况条件下分析不同铜管壁厚对连接强度的影响,分析结果表明铜管在以上两种下工况不会发生开裂,壁厚为0.6、0.7mm的管件洛克环连接存在泄漏风险,建议配管选大于0.7mm壁厚铜管。

关键词: 洛克环, 连接, CAE, ABAQUS

Abstract: Lokring Ring is a very efficient and reliable connection technology of the pipes, which has completely replaced the traditional argon arc welding and resistance welding technology in the refrigeration industry. This paper used the CAE simulation technology to simulate the copper pipes connecting process by Lokring Ring, analysed the influences of the different wall thickness of the copper tubes on the bonding strength under the static pressure condition of 18.6MPa and 6.3MPa. The results show that copper will not crack with above two conditions, but there was a leak risk with the wall thickness of pipe 0.6 and 0.7mm connecting by Lokring Ring, suggested to choose the copper pipe more than 0.7mm thickness.

Key words: Lokring Ring, Connection, CAE, ABAQUS

刘显威, 肖肖, 陈子雄, 刘国虬, 李游. 制冷设备洛克环连接强度仿真分析[J]. 家电科技, 2018, 0(5): 63-65.

LIU Xianwei, XIAO Xiao, CHEN Zhixiong, LIU Guoqiong, LI You. Simulation analysis on the bonding strength of Lokring Ring in refrigeration equipment[J]. Journal of Appliance Science & Technology, 2018, 0(5): 63-65.

[1]	苏进, 王军, 孙强, 盛保敬, 张蕊. 薄壁彩板焊接方式探究[J]. 家电科技, 2019, 0(1): 79-81.
[2]	刘显威, 肖肖, 朱森旺, 贺志, 惠顺利. 跌落仿真在分体式空调器室内机包装优化的应用[J]. 家电科技, 2018, 0(11): 58-63.