家电科技 ›› 2020, Vol. 0 ›› Issue (1): 102-107.doi: 10.19784/j.cnki.issn1672-0172.2020.01.018

• 论文 • 上一篇    下一篇

净水机单向阀的低噪声设计

周军   

  1. 佛山市美的清湖净水设备有限公司 广东佛山 528311
  • 出版日期:2020-02-01 发布日期:2020-02-13

The structure design of a low noise check valve

ZHOU Jun   

  1. Foshan Midea Qinghu Water Purification Equipment Co., Ltd. Foshan 528311
  • Online:2020-02-01 Published:2020-02-13

摘要: 基于单自由度弹簧振子运动方程和单向阀的工作特性,分析和确定了阀芯受扰动颤振是单向阀产生呜呜声的主要原因;据此提出了阀芯入口流场优化,阀芯导向结构优化和弹簧刚度优化是低噪声单向阀设计的主要途径;通过阀芯入口流场和阀芯导向结构优化的低噪声单向阀结构,经过数值分析和试验验证,整机噪声改善3dB左右,关键峰值频段160Hz改善7dB,整机噪声音质改善显著。

关键词: 阀芯颤振, 自激振动, 双导向结构, 速度涡

Abstract: Based on a study on the motion equation of 1D spring oscillator and the work characteristics of the check valve, it is concluded that the flutter of the spool of valve is the main reason for the check valve producing humming noise; According to the mechanism of the humming noise of the check valve, the optimization of spool inlet flow field, spool guiding structure and spring stiffness of the check valve are considered to be the main ways for designing low noise check valve; The low noise check valve is designed by the optimization of spool inlet flow field and spool guiding structure, some analysis and tests are performed and the new check valve noise improvement is verified. The test results show that the new check valve noise is improved by about 3dB on the whole unit, which is improved by 7dB at the key peak frequency band of 160Hz, and the sound quality of unit improved significantly.

Key words: A flutter of valve, Self-excited vibration, Double guiding structure, Velocity vortex

中图分类号: