注塑级高抗冲聚苯乙烯中再生料添加量对材料性能的影响

doi:10.19784/j.cnki.issn1672-0172.2019.01.006

Journal of Appliance Science & Technology ›› 2019, Vol. 0 ›› Issue (3): 58-59.doi: 10.19784/j.cnki.issn1672-0172.2019.01.006

• Articles • Previous Articles Next Articles

Effect of the recycled plastics on the properties of injection molding grade high impact polystyrene

WANG Yanfeng

Gree Electric Appliance, Inc. of Zhuhai Zhuhai 519070

Online:2019-06-01 Published:2019-07-03

Abstract

Abstract: The recycled high impact polystyrene (HIPS) was added into the injection grade new HIPS, and the properties of mixed HIPS were studied. The tensile strength, elongation at break and izod impact strength of mixed HIPS decreases with the increase of recycled HIPS ratios. The tensile strength, elongation at break and izod impact strength of mixed materials can be more than 85%, 85% and 75% of the new HIPS, respectively. The influence of recycled HIPS on the bending strength was not obvious, and the thermal deformation temperature of mixed HIPS is basically the same as that of the new material.

Key words: Injection grade, HIPS, Recycled material, Properties

WANG Yanfeng. Effect of the recycled plastics on the properties of injection molding grade high impact polystyrene[J]. Journal of Appliance Science & Technology, 2019, 0(3): 58-59.

[1]	Chalearn Bouted, Chavalit Ratanatamskul, Alberto Salvo, Hashimoto K, Kawakami Y, Zhao Bin, Yi Ren, Gao Diankui, Shi Chengjiang, Xu Lizhi, Zhang Yuanyuan, Bin Hu R.Z. Wang, Biao Xiao, Lin He, Wei Zhang, Shihang Zhang, Stamminger R, Tecchio P, Ardente F, Mathieux F, Niestrath P, Shijiao Yan, Yong Gan, Xingyue Song, Yunqiang Chen, Na Liao, Song Chen, Chuanzhu Lv. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 8 -9 .
[2]	. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 10 -15 .
[3]	. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 16 -19 .
[4]	KONG Fanhai, XUE Yuxin, YANG Lei, DENG Linjuan, LIU Hanyang, DU Qihang. Examples of evaluation of uncertainty in measurement of household refrigerators in energy efficiency energy consumption[J]. Journal of Appliance Science & Technology, 2019, 0(2): 116 -121 .
[5]	. [J]. Journal of Appliance Science & Technology, 2019, 0(2): 122 -123 .
[6]	. [J]. Journal of Appliance Science & Technology, 2019, 0(2): 124 -125 .
[7]	. [J]. Journal of Appliance Science & Technology, 2019, 0(3): 10 -11 .
[8]	. [J]. Journal of Appliance Science & Technology, 2019, 0(3): 12 -13 .
[9]	. [J]. Journal of Appliance Science & Technology, 2019, 0(3): 14 -19 .
[10]	. [J]. Journal of Appliance Science & Technology, 2019, 0(3): 20 -21 .

Effect of the recycled plastics on the properties of injection molding grade high impact polystyrene

PDF

Knowledge

Abstract

Cite this article

share this article

References 2

Related Articles 2

Metrics

Comments

Recommended 10

[1]	詹建新. 注塑级再生料与全新料的对比及应用[J]. 家电科技, 2013, 10:84-86.
[2]	张秀娟. 原料与再生料关联分析[J]. 中国石化, 2015, 10: 31-33.

[1]	YU Longying, TAN Bing, LI Meng. Study on high and low temperature storage performance of plastic raw materials for household air conditioning [J]. Journal of Appliance Science & Technology, 2019, 0(3): 60-63.
[2]	LUO Yan, SUN Jiaqi, AN Ziyun, DING Xuemei. Effects of domestic tumble laundering on the physical properties of denim fabrics [J]. Journal of Appliance Science & Technology, 2019, 0(3): 112-115.