压缩机阀片用高强度不锈钢材料的国产化开发

doi:10.19784/j.cnki.issn1672-0172.2023.06.008

Abstract

Abstract: As a critical component of refrigeration compressor, the flapper valve takes part in the suction, compressing, discharging and expansion process in order to achieve the flow of the refrigerant with single direction. Therefore, the compressor lifetime could be effected by the performance and reliability of flapper valve. Through modifying the raw material composition, employing a new casting technique, and optimizing the heat treatment process, a specific high performance stainless steel novel material was launched to accomplish the localized manufacture of compressor flapper valve. As compared to imported valve materials, the mechanical characteristics and metallographic structure of this product have reached the applicable level; a designed fatigue testing rig has been applied for the examination of impact fatigue life of valve under virtual working conditions, and this product passed the test successfully. Combining the testing results, this developed novel stainless steel can satisfy all requirements for the compressor valve applications. Moreover, this study contributes to research and develop the next generation valve strip steel with higher performance.

Key words: Refrigeration compressor, Flapper valve, Stainless steel, Heat treatment, Mechanical properties, Giga cycle fatigue life, Reliability

CLC Number:

CAO Yizhen, LIANG Xiaowei, QIN Bin, DU Weifeng, JIA Nan. Domestic development of high strength stainless steel for compressor flapper valve application[J]. Journal of Appliance Science & Technology, 2023, 0(6): 51-57.

References

[1] 沈庆根. 设备故障诊断[M]. 北京: 化学工业出版社, 2007: 189.
[2] 赵洋, 张子祺, 汪超, 等. 小型制冷压缩机阀片防失效技术研究进展[J]. 家电科技, 2022(04): 50-57.
[3] 韩宝坤, 张冬鸣, 张国伟, 等. 基于流固耦合法的往复压缩机吸气阀流场特性研究[J]. 流体机械, 2021, 49(05): 47-53.
[4] 梁晓瑜, 毛君, 王鑫. 高压工质冲击下压缩机吸气阀紊动射流形态模拟[J]. 机械设计, 2022, 39(02): 18-23.
[5] 王枫, 尚浩田, 米小珍, 等. 基于CFD的舌簧排气阀流动特性研究[J]. 制冷学报, 2016, 37(02): 38-45.
[6] 郑星炜, 黄刚, 郑立宇. 往复式压缩机吸排气阀组流固耦合仿真研究[J]. 家电科技, 2022(02): 82-86.
[7] 王枫, 彭学院. 压缩机舌簧阀组的公理化设计[J]. 流体机械, 2011, 39(06): 38-42+12.
[8] 胡远培, 徐嘉, 杨欧翔, 等. 结构参数对压缩机阀片冲击特性的影响研究[J]. 冷藏技术, 2021, 44(03): 55-59.
[9] J. Kim, S. Wang, S. Park, et al.Valve Dynamic Analysis of a Hermetic Reciprocating Compressor[A]// International Compressor Engineering Conference[C], 2006: 1805.
[10] F. Wang, G. Mu, Q. Guo.Design optimization of compressor reed valve based on axiomatic design[J]. International Journal of Refrigeration, 2016, 72: 132-139.
[11] Y. K. Kwon, G. H. Lee, T. J. Lee.The Design of Compressor Valve to Consider the Flexibility and Reliability[A]// International Compressor Engineering Conference[C], 2004: 1705.
[12] 杨丰毓, 吴斌, 周慧. 吸气阀片对制冷压缩机整机性能影响精细化研究[J]. 家电科技, 2021(05): 64-67.
[13] S. Tamura, N. Yahata.Impact Fatigue of Reed Valve[J]. Transactions Of The Japan Society of Mechanical Engineers Series C, 1994, 60: 632-638.
[14] M. Farzaneh-Gord, H. Khoshnazar.Valve fault detection for single-stage reciprocating compressors[J]. Journal of Natural Gas Science and Engineering, 2016, 35: 1239-1248.
[15] D. Jankov, W. Soedel.Pressure Signatures of Damaged Valves[C]. Purdue Compressor Technology Conference, 1988.
[16] 方泽云, 戴竟雄, 陆龙富, 等. 不锈钢材质阀片的研究[A]// 2008年中国家用电器技术大会论文集[C], 2008: 210-216.
[17] 梅先松, 缪德良, 赵越. 压缩机用阀片钢使用中应注意的问题[J]. 流体机械, 2001, 29(04): 44-45.
[18] 付玉彬, 单向东, 宰学荣. 冰箱压缩机阀片断裂失效分析[J]. 材料开发与应用, 2008, 23(05): 71-76.
[19] G. Chai, G. Zetterholm, B. Walden.Flapper Valve Steels With High Performance[A]// International Compressor Engineering Conference[C], 2004: 1702.
[20] A. C. Altunlu, I. Lazoglu, E. Oguz, et al.Impact Fatigue Characteristics of Valve Leaves For Small Hermetic Reciprocating Compressors[A]// International Compressor Engineering Conference[C], 2010: 1994.
[21] 李华军, 罗祥胜, 戴竟雄, 等. PEEK材料应用于制冷压缩机上的研究[J]. 家电科技, 2020(zk): 61-63.
[22] 章国江, 郑传祥, 刘远峰, 等. 碳纤维复合材料小型压缩机阀片性能试验研究[J]. 高科技纤维与应用, 2016, 41(06): 53-56.
[23] M. Hareland, A. Hoel, S. Jonsson, et al.Chai. Selection of Flapper Valve Steel for High Efficient Compressor[A]// International Compressor Engineering Conference[C], 2014: 2330.
[24] B. Auren, G.Chai.Effect Of Material Properties And Surface Treatment On The Performance Of Stainless Flapper Valve Steel For Compressors[A]// International Compressor Engineering Conference[C], 2002: 1552.
[25] 肖鹏, 张勤建, 杨骅, 等. 滚抛工序对冰箱压缩机阀片性能的影响研究[J]. 日用电器, 2019(12): 43-46+61.
[26] M. Mueller, G. Zetterholm, G. Chai.Influence of Material Orientation on the Fatigue Properties of Flapper Valve[A]// International Compressor Engineering Conference[C], 2006: 1800.
[27] M. Svenzon.Impact Fatigue of Valve Steel[A]// International Compressor Engineering Conference[C], 1976: 172.
[28] M. Nystrom, P. Liu, T. Larsson, et al.Impact Fatigue of Compressor Valve Steel[A]// International Compressor Engineering Conference[C], 1996: 1156.
[29] 张平, 周上祺. 热处理工艺对Cr13型不锈钢组织和性能的影响[J]. 特钢技术, 2007, 13(03): 11-17.
[30] 张喆. 热处理工艺对4Cr13马氏体不锈钢组织与性能的影响研究[D]. 沈阳: 东北大学, 2013.
[31] 任峰岩, 许磊, 王有超, 等. 高性能空调阀片钢的热处理工艺及性能研究[J]. 热加工工艺, 2019, 48(18): 126-129+132.
[32] 于多, 沙春晖, 刘伟, 等. 回火温度对4Cr13塑料模具钢组织与耐蚀性能的影响[J]. 上海金属, 2019, 41(04): 59-62+74.
[33] S. Dhar.Repeated impact on fatigue fracture of carbon spring En-42J steel[J]. Theoretical and applied fracture mechanics, 1988, 10: 165-171.
[34] R. Dusil, B. Johansson.Material Aspects of Impact Fatigue of Valve Steels[A]// International Compressor Engineering Conference[C], 1978: 254.
[35] T. Tajima, K. Sakitani, S. Fujimoto, et al.A Study on Impact Fatigue of Compressor Valve[A]// International Compressor Engineering Conference[C], 1988: 633.
[36] M. W. Tofique, A. Lof, E. Schillaci, et al.Experimental and Numerical Analysis Of Reed Valve Movement In An Impact Fatigue Test System and Reciprocating Compressors[A]// International Compressor Engineering Conference[C], 2021: 2697.

Domestic development of high strength stainless steel for compressor flapper valve application

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Metrics

Comments

Recommended 0

[1]	CHEN Kaidong, HE Weiqiang, XIONG Jun, ZHANG Liang, ZHENG Heqing. Experimental study on low temperature exhaust reliability of household fresh air conditioner [J]. Journal of Appliance Science & Technology, 2023, 0(zk): 247-251.
[2]	JIANG Zhuohua, PENG Bo, FU Xiuliang, SHI Xianjing. Optimal design and test of automatic refrigerator door opening and closing actuator [J]. Journal of Appliance Science & Technology, 2023, 0(3): 48-53.
[3]	CHANG Xuesong, WANG Haiyan, HAN Chong, YAO Li, BAI Qing, LI Hongtao. Study on antibacterial high impact polystyrene liner material for refrigerators [J]. Journal of Appliance Science & Technology, 2023, 0(2): 82-85.
[4]	FAN Caiquan, WANG Yongshuai, SUN Xiaokai, LIU Tiewei, ZHANG Xiangping, LI Qingxi. Research on deformation evaluation model of rigid polyurethane foam dimensional change under the condition of multi-factor hybrid disturbance [J]. Journal of Appliance Science & Technology, 2022, 0(zk): 52-55.
[5]	LIAO Shengli. Selection and evaluation of conformal coating for PCBA in home appliances [J]. Journal of Appliance Science & Technology, 2022, 0(zk): 92-95.
[6]	WANG Guodao, LV Shuqi. A reliability test method for air treatment system [J]. Journal of Appliance Science & Technology, 2022, 0(zk): 246-250.
[7]	MIAO Wanlei. Experimental study on low-temperature refrigeration function of household air conditioner [J]. Journal of Appliance Science & Technology, 2022, 0(zk): 322-326.
[8]	YIN Lu, XUE Yang, YANG Qingbo, CAO Yunyi, CAO Haoqiang. Study on antibacterial passivation technology of washing machine inner barrel stainless steel [J]. Journal of Appliance Science & Technology, 2022, 0(zk): 508-511.
[9]	ZHAO Chuyan. Analysis on high temperature sterilization and self-cleaning function of constant frequency air conditioner [J]. Journal of Appliance Science & Technology, 2022, 0(zk): 674-678.
[10]	JIANG Yonggang, JIANG Bin, XIONG Keyong, LIANG Guisheng. Frost free refrigerator research, application of defrosting fuse fault analysis, reliability design [J]. Journal of Appliance Science & Technology, 2022, 0(4): 84-87.
[11]	SHANG Rui, QIN Haiyan, CHEN Zhijie, HAN Yang. The influence and protection research of natural wind on air source heat pump operating [J]. Journal of Appliance Science & Technology, 2021, 0(zk): 247-250.
[12]	SUO Wenping, HE Shenglin. Analysis of large displacement scroll compressor injection pressure fluctuation and improvement study [J]. Journal of Appliance Science & Technology, 2021, 0(zk): 288-290.
[13]	YUAN Qingqing, WU Yongheng, ZHU Jinjiang, CAO Xuanwei. Life design of compressor based on Weibull distribution [J]. Journal of Appliance Science & Technology, 2021, 0(zk): 374-376.
[14]	ZHOU Boru, YANG Yang. Research on failure mechanism of the automotive electronic components and CAE simulation [J]. Journal of Appliance Science & Technology, 2021, 0(6): 116-119.
[15]	WANG Nan, LIU Qiankun. Discussion on the electrical safety design of the outdoor unit of the 24V vehicle air conditioner [J]. Journal of Appliance Science & Technology, 2021, 0(6): 124-129.