非对称结构电磁屏蔽复合材料研究进展

doi:10.19784/j.cnki.issn1672-0172.2025.99.114

Abstract

Abstract: addresses electromagnetic radiation from 5G communication, smart appliances, and wearable devices by studying asymmetric structured electromagnetic shielding composites to overcome the drawbacks of traditional metal-based shields. The characterization methods for EMI SE are outlined, and progress is systematically reviewed regarding multilayer, fiber, porous, and segregated structures. Results indicate that these materials achieve a synergistic “absorption-reflection-reabsorption” mechanism via their designed structures, enhancing shielding effectiveness while reducing secondary reflection pollution. Their advantages in lightness and flexibility make them highly applicable for electromagnetic protection in smart household appliances and wearable electronics. Future work should focus on interdisciplinary design, intelligent regulation, and green sustainability to overcome challenges like interfacial stability and scalable production for achieving high absorption, ultra-low reflection, and environmental friendliness.

Key words: Polymers, Nanocomposites, Asymmetric structures, Electromagnetic shielding, Household appliances

CLC Number:

TM925.0

YUAN Xiaoxi, YANG Tongqian, JIAO Can. Research progress of electromagnetic shielding composites with asymmetric structures[J]. Journal of Appliance Science & Technology, 2025, 0(zk): 548-551.

References

[1] He W, Chen G, Li C, et al.Magnetically aligned CNT/magnetite heterogeneous composite membranes for electromagnetic wave shielding and heat dissipation[J]. Materials Research Bulletin, 2022, 149.
[2] Gong S, Sheng X, Li X, et al.A multifunctional flexible composite film with excellent multi-source driven thermal management, electromagnetic interference shielding, and fire safety performance, inspired by a “brick-mortar” sandwich structure[J]. Advanced Functional Materials, 2022, 32(26).
[3] Cao W, Ma C, Tan S, et al.Ultrathin and flexible CNTs/MXene/cellulose nanofibrils composite paper for electromagnetic interference shielding[J]. Nanomicro Letters, 2019, 11(01): 72.
[4] Zhou B, Li Q, Xu P, et al.An asymmetric sandwich structural cellulose based film with self-supported MXene and AgNW layers for flexible electromagnetic interference shielding and thermal management[J]. Nanoscale, 2021, 13(04): 2378-2388.
[5] Zhang F, Ren P, Guo Z, et al.Asymmetric multilayered MXene-AgNWs/cellulose nanofiber composite films with antibacterial properties for highefficiency electromagnetic interference shielding[J]. Journal of Materials Science and Technology, 2022, 129: 181-189.
[6] Yuan M, Fei Y, Zhang H, et al.Electromagnetic asymmetric films comprise metal organic frameworks derived porous carbon for absorption-dominated electromagnetic interference shielding[J]. Composites Part B: Engineering, 2022, 233.
[7] Mai T, Guo W Y, Wang P L, et al.Bilayer metal-organic frameworks/MXene/nanocellulose paper with electromagnetic double loss for absorptiondominated electromagnetic interference shielding[J]. Chemical Engineering Journal, 2023, 464.
[8] Lee S, Park J, Kim M C, et al.Polyvinylidene fluoride core-shell nanofiber membranes with highly conductive shells for electromagnetic interference shielding[J]. ACS Applied Materials & Interfaces, 2021, 13(21): 25428-25437.
[9] Zhang Y, Yang S, Zhang Q, et al.Constructing interconnected asymmetric conductive network in TPU fibrous film: Achieving low-reflection electromagnetic interference shielding and superior thermal conductivity[J]. Carbon, 2023, 206: 37-44.
[10] Lv Z, Kong L, Sun P, et al.Dual-functional eco-friendly liquid metal/boron nitride/silk fibroin composite film with outstanding thermal conductivity and electromagnetic shielding efficiency[J]. Composites Communications, 2023, 39.
[11] Zhang X, Tang J, Zhong Y, et al.Asymmetric layered structural design with metal microtube conductive network for absorption-dominated electromagnetic interference shielding[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2022, 643.
[12] Xue B, Li Y, Cheng Z, et al.Directional electromagnetic interference shielding based on step-wise asymmetric conductive networks[J]. Nanomicro Letters, 2021, 14(01): 1-16.
[13] Zhang J, Zhu D, Zhang S, et al.Asymmetric electromagnetic shielding performance based on spatially controlled deposition of nickel nanoparticles on carbon nanotube sponge[J]. Carbon, 2022, 194: 290-296.
[14] Duan H, Zhu H, Gao J, et al.Asymmetric conductive polymer composite foam for absorption dominated ultra-efficient electromagnetic interference shielding with extremely low reflection characteristics[J]. Journal of Materials Chemistry A, 2020, 8(18): 9146-9159.
[15] Li M, Feng Y, Wang J.Asymmetric conductive structure design for stabilized composites with absorption dominated ultra-efficient electromagnetic interference shielding performance[J]. Composites Science and Technology, 2023, 236.
[16] Liu G, Yu R, Liu D, et al.3D-printed TiO₂-Ti₃C₂T_x heterojunction/rGO/PDMS composites with gradient pore size for electromagnetic interference shielding and thermal management[J]. Composites Part A: Applied Science and Manufacturing, 2022, 160.
[17] Zuo T, Xie C, Wang W, et al.Ti₃C₂T_x MXene-ferroferric oxide/carbon nanotubes/waterborne polyurethane-based asymmetric composite aerogels for absorption-dominated electromagnetic interference shielding[J]. ACS Applied Nano Materials, 2023, 6(06): 4716-4725.
[18] Pei X, Liu G, Shi H, et al.Directional electromagnetic interference shielding of asymmetric structure based on dual-needle 3D printing[J]. Composites Science and Technology, 2023, 233.
[19] Yu W C, Wang T, Liu Y H, et al.Superior and highly absorbed electromagnetic interference shielding performance achieved by designing the reflection-absorption-integrated shielding compartment with conductive wall and lossy core[J]. Chemical Engineering Journal, 2020, 393.
[20] Sun B, Sun S, He P, et al.Asymmetric layered structural design with segregated conductive network for absorption-dominated high-performance electromagnetic interference shielding[J]. Chemical Engineering Journal, 2021, 416.
[21] Wang Z, Wang S, Zhang K, et al.Heterostructured composite foam with highly efficient absorption-dominant EMI shielding capability and mechanical robustness[J]. Composites Communications, 2023, 40.
[22] 袁晓曦, 张伟, 李华. 智能家电电磁兼容性测试技术研究进展[J]. 家电科技, 2022 (zk): 45-50.

Research progress of electromagnetic shielding composites with asymmetric structures

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Metrics

Comments

Recommended 10

[1]	YU Ling, YAN Ling, BAO Jingjing, LI Tingting, ZHU Xiangjuan. Research on the applicability of component standards under the household appliance standard system [J]. Journal of Appliance Science & Technology, 2025, 0(zk): 94-98.
[2]	WANG Boyan, LI Xin, ZHANG Ziqi, YANG Shuang, WANG Chao, XU Chuanfang, CAO Yanjing. Research progress on leakage and diffusion of flammable refrigerants in household appliances [J]. Journal of Appliance Science & Technology, 2025, 0(zk): 314-318.
[3]	ZHANG Yuqing, XU Xiujie, ZHANG Qingling, ZHAO Jindan. Research status and evaluation system of HPV removal performance of household appliances [J]. Journal of Appliance Science & Technology, 2025, 0(zk): 334-337.
[4]	JIA Jia. Review on key technologies and applications of all-aluminum heat exchangers in household appliances [J]. Journal of Appliance Science & Technology, 2025, 0(zk): 552-559.
[5]	SHANG Zhe, CAO Caiguang, TANG Shanxuan, LIU Ming, LIU Pu. Fault diagnosis of intelligent household appliances based on dual graph attention network and interval prediction [J]. Journal of Appliance Science & Technology, 2025, 0(1): 48-52.
[6]	LI Yuxiang, HU Yaxin, JIAO Limin, LI Hongwei, ZHAO Peng, WANG Chao. Design and implementation of home energy management system based on photovoltaic energy storage direct current flexibility（PEDF） technology [J]. Journal of Appliance Science & Technology, 2024, 0(zk): 36-40.
[7]	LV Shuqi, WANG Guodao, WANG Feng. The application of text analysis methods on household appliance after-sale reliability analysis [J]. Journal of Appliance Science & Technology, 2024, 0(zk): 511-517.
[8]	LAI Xiaodong. Interpretation of GB 4343.1-2024 related to electromagnetic compatibility - requirements for household appliances, electric tools and similar apparatus -Part 1: emission [J]. Journal of Appliance Science & Technology, 2024, 0(zk): 518-521.
[9]	ZHOU Xia. Approach on evaluation method of preventive maintenance time for household appliances [J]. Journal of Appliance Science & Technology, 2024, 0(6): 34-37.
[10]	CHEN Kean, LI Hao, ZHANG Jun, DENG Yunyun, ZHAO Huanqi, TIAN Feng. Audio injection method and its applications into household appliances [J]. Journal of Appliance Science & Technology, 2024, 0(5): 14-21.
[11]	HE Yao, ZHOU Tong, WANG Jing, ZHAO Yili, HU Weiwei, ZHOU Wenhong. Nutrient retention techniques in food processing: from traditional methods to modern innovations [J]. Journal of Appliance Science & Technology, 2024, 0(4): 42-46.
[12]	LI Xiaohong, JIANG Xianming, HUANG Xunqing. Approach on humidity control requirements for electric storage water heater test environment [J]. Journal of Appliance Science & Technology, 2023, 0(4): 99-103.
[13]	TIAN Yunlong, LIANG Jing, YANG Wenquan, YIN Xuejing. Research on the whole process of user experience of household appliances oriented by contact [J]. Journal of Appliance Science & Technology, 2023, 0(2): 118-121.
[14]	JIAO Limin, LIU Zechao, GU Ziqian, JIN Lun, HU Yaxin, WANG Shengze, LIU Dongyang. Research on the construction of speech interaction ability test corpus for smart home appliances [J]. Journal of Appliance Science & Technology, 2022, 0(zk): 130-134.
[15]	QU Xiaolei, WANG Haiyan, YANG Dahai, JIANG Shuo, JIANG Wenjing. Research on the progress of gas dehumidification technology [J]. Journal of Appliance Science & Technology, 2022, 0(zk): 612-615.