基于ANSYS CFD的空气净化器风轮仿真优化研究

Abstract

Abstract: Based on wind wheel of air cleaner, this paper uses ANSYS Workbench to build the design analysis process and conducts a simulation optimization of wind wheel by using ANSYS CFD. Simulation results show that noise-reduction can be achieved by optimizing the structural parameters of the wind wheel. The proposed parameterization method and CFD analysis process provide an effective tool for the optimization design of centrifugal fan.

Key words: Air cleaner, Wind wheel, CFD, Optimization, Noise-reduction

YANG Wei, LIN Yongzhi. Simulation and optimization research of air cleaner’s wind wheel based on ANSYS CFD[J]. Journal of Appliance Science & Technology, 2019, 0(2): 58-62.

[1]	Chalearn Bouted, Chavalit Ratanatamskul, Alberto Salvo, Hashimoto K, Kawakami Y, Zhao Bin, Yi Ren, Gao Diankui, Shi Chengjiang, Xu Lizhi, Zhang Yuanyuan, Bin Hu R.Z. Wang, Biao Xiao, Lin He, Wei Zhang, Shihang Zhang, Stamminger R, Tecchio P, Ardente F, Mathieux F, Niestrath P, Shijiao Yan, Yong Gan, Xingyue Song, Yunqiang Chen, Na Liao, Song Chen, Chuanzhu Lv. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 8 -9 .
[2]	. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 10 -15 .
[3]	. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 16 -19 .
[4]	. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 20 -23 .
[5]	. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 24 -25 .
[6]	. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 26 -27 .
[7]	. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 28 -29 .
[8]	. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 30 -31 .
[9]	. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 32 -33 .
[10]	. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 34 -37 .

Simulation and optimization research of air cleaner’s wind wheel based on ANSYS CFD

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 10

Metrics

Comments

Recommended 10

[1]	ZHANG Liang, GONG Chun. Study on optimization of muffler for small high-speed fan by considering pressure loss [J]. Journal of Appliance Science & Technology, 2019, 0(4): 84-87.
[2]	WANG Liya, JIANG Jun, LI Yuting, HE Jing, REN Wei. Study on smoothness and abnormal noise of refrigerator self-locking structure [J]. Journal of Appliance Science & Technology, 2019, 0(4): 91-94.
[3]	TIAN Le, ZHAO Xue, LIU Richao, LI Xiang. The optimization design research of dishwasher water flow system structure [J]. Journal of Appliance Science & Technology, 2019, 0(4): 108-111.
[4]	ZHANG Xiao, ZHANG Weichao, GUO Kan, QI Xin. A qualitative evaluation method for air cleaner filter odor [J]. Journal of Appliance Science & Technology, 2019, 0(2): 113-115.
[5]	LIANG Quan, LV Peishi, XU Liang, LIU Xiujiao. Vibration optimization design for heat pump dryer pipeline system [J]. Journal of Appliance Science & Technology, 2019, 0(2): 50-53.
[6]	HUANG Shenghua, WANG Yao, WANG Dongxiang, ZHANG Bo. Research on the performance improvement of the cross-side door refrigerator based on CFD analysis [J]. Journal of Appliance Science & Technology, 2018, 0(8): 50-53.
[7]	ZHANG Gouyuan. Research and application of the influence of pipe on the vibration noise of air conditioning [J]. Journal of Appliance Science & Technology, 2018, 0(6): 60-63.
[8]	PANG Feng. Research on the influence of mesh enclosure/wind wheel/air-guiden ring on the air volume and noise of air conditioner outdoor unit [J]. Journal of Appliance Science & Technology, 2018, 0(5): 56-59.
[9]	DENG Zhanwei, LIU Guangyou. Analysis on factors that affect IFD air cleaner’s CADR [J]. Journal of Appliance Science & Technology, 2018, 0(5): 86-89.
[10]	SHENG Baojing, CUI Jing, SUN Qiang, CAI Xiangzhou. Simulation of Hot Water Output Rate of Electric Water Heater by CFD Simulation [J]. Journal of Appliance Science & Technology, 2018, 0(2): 30-34.