基于TRIZ理论的破壁机玻璃杯轻量化设计

doi:10.19784/j.cnki.issn1672-0172.2022.03.003

家电科技 ›› 2022, Vol. 0 ›› Issue (3): 26-28.doi: 10.19784/j.cnki.issn1672-0172.2022.03.003

基于TRIZ理论的破壁机玻璃杯轻量化设计

魏云杰, 刘海亮, 刘朝登

杭州九阳小家电有限公司浙江杭州 310018

出版日期:2022-06-01 发布日期:2022-06-20
作者简介:刘海亮,博士,轻工类高级工程师。研究方向：小家电材料与工艺。地址：杭州经济技术开发区下沙街道760号。E-mail：lhl416@126.com。

Lightweight design of the glass cup of blender based on TRIZ theory

WEI Yunjie, LIU Hailiang, LIU Chaodeng

Hangzhou Joyoung Household Electrical Appliance Co., Ltd. Hangzhou 310018

Online:2022-06-01 Published:2022-06-20

摘要/Abstract

摘要： 通过对TRIZ理论问题分析,找到轻量化玻璃杯体的3个关键点。在满足功能要求的前提下,从不等壁厚设计、把手人体工学设计以及扰流筋内凸外凹设计三个方面实现了破壁机玻璃杯体的轻量化方案,较原来杯体减重420 g,占比27%。同时优化了高硼硅玻璃杯体压制加工工艺,使设计方案具备批量生产条件。

关键词: TRIZ理论, 轻量化杯体, 不等壁厚, 人体工学

Abstract: Three key shortcomings of lightweight glass cup are found through the analysis of TRIZ theory. The lightweight scheme of the glass cup of blender is realized from three aspects: the design of unequal wall thickness, the ergonomic design of the handle and the convex inside and concave outside design of the spoiler. Compared with the original glass cup, the weight of the glass cup was reduced by 420 g, and the pressing processing technology of the high borosilicate glass cup was optimized, so that the design scheme could meet the conditions of mass production.

Key words: TRIZ theory, Lightweight cup body, Different wall thickness, Ergonomic

中图分类号:

魏云杰, 刘海亮, 刘朝登. 基于TRIZ理论的破壁机玻璃杯轻量化设计[J]. 家电科技, 2022, 0(3): 26-28.

WEI Yunjie, LIU Hailiang, LIU Chaodeng. Lightweight design of the glass cup of blender based on TRIZ theory[J]. Journal of Appliance Science & Technology, 2022, 0(3): 26-28.

基于TRIZ理论的破壁机玻璃杯轻量化设计

Lightweight design of the glass cup of blender based on TRIZ theory

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

Metrics

本文评价

推荐阅读 10