机电产品碳足迹评估方法研究综述

doi:10.19784/j.cnki.issn1672-0172.2022.06.009

家电科技 ›› 2022, Vol. 0 ›› Issue (6): 60-63.doi: 10.19784/j.cnki.issn1672-0172.2022.06.009

机电产品碳足迹评估方法研究综述

王玲¹, 张光立², 姜丰²

1.中国电器科学研究院股份有限公司广东广州 510300;
2.合肥工业大学机械工程学院安徽合肥 230009

出版日期:2022-12-01 发布日期:2023-01-10
通讯作者: 张光立,E-mail：2774263892@qq.com。
作者简介:王玲（1970—）,博士学位。研究方向：电器电子产品绿色制造领域。地址：广东省广州市海珠区新港西路204号1号楼中国电器科学研究院股份有限公司。E-mail：81982684@qq.com。
基金资助:
广州市科技计划项目（20212210004）; 国家工业与信息化部2021年产业技术基础公共服务平台项目（2021-H028-1-1）

Review on carbon footprint assessment methods of electromechanical products

WANG Ling¹, ZHANG Guangli², JIANG Feng²

1. China National Electric Apparatus Research Institute Co., Ltd. Guangzhou 510300;
2. School of Mechanical Engineering, Hefei University of Technology Hefei 230009

Online:2022-12-01 Published:2023-01-10
Supported by:
Guangzhou Science and Technology Plan Project (No.20212210004)

摘要/Abstract

摘要： 低碳制造是可持续发展的必然途径。低碳制造技术是实现中国制造业转型的重要方法和手段。针对碳足迹评估方法的应用现状,搜集并分析国内外相关领域的文献,对当前研究的成果进行总结,并分析碳足迹评估的核心技术点及存在的若干问题,以进一步推动机电产品低碳制造技术的发展与应用。

关键词: 机电产品, 低碳制造, 碳足迹评估

Abstract: Low-carbon manufacturing is an inevitable way for sustainable development. Low-carbon manufacturing technology is an important method and means to realize the transformation of China's manufacturing industry. In view of the application status of carbon footprint assessment methods, collects and analyzes the relevant literatures at home and abroad, summarizes the current research results, and analyzes the core technology points and existing problems of carbon footprint assessment, so as to further promote the development and application of low-carbon manufacturing technology for mechanical and electrical products.

Key words: Electromechanical products, Low carbon manufacturing, Carbon footprint assessment

中图分类号:

TB472

王玲, 张光立, 姜丰. 机电产品碳足迹评估方法研究综述[J]. 家电科技, 2022, 0(6): 60-63.

WANG Ling, ZHANG Guangli, JIANG Feng. Review on carbon footprint assessment methods of electromechanical products[J]. Journal of Appliance Science & Technology, 2022, 0(6): 60-63.

参考文献

[1] Jeswiet J, Kara S.Carbon emissions and CES in manufacturing[J]. CIRP Annals- Manufacturing Technology, 2008, 57(01): 17-20.
[2] Maria Hernandez, Maarten Messagie, Michele De Gennaro, Joeri Van Mierlo.Resource depletion in an electric vehicle powertrain using different LCA impact methods[J]. Resources, Conservation and Recycling, 2017, 120: 119-130.
[3] Trinh Hoang Tran Mai Kim, Chowdhury Sanaul, Nguyen Minh Tuong, Liu Tingting. Optimising flat plate buildings based on carbon footprint using Branch-and-Reduce deterministic algorithm[J]. Journal of Cleaner Production, 2021, 320: 128780.
[4] 王欣, 李文强, 李彦. 基于生命周期的机电产品碳足迹评价与实现方法[J]. 机械设计与制造, 2016(05): 1-4.
[5] Jingrui Chen, Dan Zhou, Yue Zhao.Life cycle carbon dioxide emissions of bike sharing in China: Production, operation, and recycling[J]. Resources, Conservation and Recycling, 2020, 162: 105011.
[6] Wei Chen, Qian Zhang, Chengxin Wang, et al.Environmental sustainability challenges of China's steel production: Impact-oriented water, carbon and fossil energy footprints assessment[J]. Ecological Indicators, 2022, 136: 108660.
[7] 吴百苗, 张一梅, 栗帅, 等. 基于LCA的污水处理方案碳中和综合影响评价[J]. 环境工程, 2022, 40(06): 130-137.
[8] 刘涛, 刘颖昊, 周烨. 生命周期评价方法在钢铁企业低碳发展规划中的应用[J]. 中国冶金, 2021, 31(09): 130-134.
[9] 徐恺飞, 金继红. 基于投入产出法的中国制造业碳排放研究[J]. 时代金融, 2020(09): 105-106.
[10] 杨璐瑶. 基于投入产出法的区域间公路货运碳排放动态研究[D]. 成都: 西南财经大学, 2020.
[11] Yang W, Wang S, Chen B.Embodied carbon emission analysis of ecoindustrial park based on inputoutput analysis and ecological network analysis[J]. Energy Procedia, 2017, 142: 3102-3107.
[12] Wiedmann T.Carbon footprint and input-output analysis-an introduction[J]. Economic Systems Research, 2009, 21(03): 175-186.
[13] 孙良峰, 裘乐淼, 张树有, 等. 面向低碳化设计的复杂装备碳排放分层递阶模型[J]. 计算机集成制造系统, 2012, 18(11): 10.
[14] Alessandro Musacchio, Pietro Bartocci, Angela Serra.Decarbonizing materials sourcing and machining in the gas turbine sector, through a cost-carbon footprint nexus analysis[J]. Journal of Cleaner Production, 2021, 310: 127392.
[15] Jiang T y, Yang Yu, Atif Jahanger, et al. Structural emissions reduction of China's power and heating industry under the goal of "double carbon": A perspective from input-output analysis[J]. Sustainable Production and Consumption, 2022(31): 346-356.
[16] Zhu K f, Xuefan Guo, Zengkai Zhang. Reevaluation of the carbon emissions embodied in global value chains based on an inter-country input-output model with multinational enterprises[J]. Applied Energy, 2022(307): 118220.
[17] Jun Peng, Wenqiang Li, Yan Li, et al.Innovative product design method for low-carbon footprint based on multi-layer carbon footprint information[J]. Journal of Cleaner Production, 2019, 228: 729-745.
[18] 李涛, 杨庆东, 祝英平. 基于碳足迹方法的数控机床绿色度评估[J]. 制造技术与机床, 2016(12): 33-35.
[19] Giulia Borghesi, Roberta Stefanini, Giuseppe Vignali.Life cycle assessment of packaged organic dairy product: A comparison of different methods for the environmental assessment of alternative scenarios[J]. Journal of Food Engineering, 2022, 318: 110902.
[20] 徐峰, 李君略, 刘声春, 彭俊明, 程俊男. 谷物联合收割机节能减排潜力评估和技术路径研究[J]. 农机化研究, 2019, 41(01): 1-8.
[21] 吴汉栋, 韩巍, 高林. 燃煤火电机组碳氧化因子分析与案例研究[J]. 工程热物理学报, 2016, 37(04): 690-694.
[22] Cellura M, Cusenza M A, Longo S.Energy-related GHG emissions balances: IPCC versus LCA[J]. Science of the Total Environment, 2018(628): 1328-1339.

机电产品碳足迹评估方法研究综述

Review on carbon footprint assessment methods of electromechanical products

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

Metrics

本文评价

推荐阅读 10

[1]	姜胡玲, 周海昕, 陈东坡, 方雯. 厨电产品操作界面字符大小可用性研究[J]. 家电科技, 2022, 0(5): 26-29.
[2]	程永胜, 徐骁琪, 黄奕洁, 李波. 居家养老模式下适老化餐厨具包容性设计研究[J]. 家电科技, 2022, 0(5): 30-37.
[3]	方雯, 周海昕, 张开川, 姜胡玲. 基于用户需求的中国洗碗机发展机遇分析[J]. 家电科技, 2021, 0(5): 80-83.