家电科技 ›› 2021, Vol. 0 ›› Issue (zk): 377-380.doi: 10.19784/j.cnki.issn1672-0172.2021.99.089

• 第四部分 材料与零部件 • 上一篇    下一篇

吸油烟机交流照明灯控制系统设计研究

刘喜1,2, 孟永哲1, 王岩1   

  1. 1.青岛海尔智慧厨房电器有限公司 山东青岛 266100;
    2.数字化家电国家重点实验室 山东青岛 266100
  • 发布日期:2021-12-22
  • 作者简介:刘喜,本科。研究方向:电控模块研究。地址:青岛海尔信息产业园A10座。E-mail:liuxi.cd@haier.com。

Design of AC floodlight control system of range hood

LIU Xi1,2, MENG Yongzhe1, WANG Yan1   

  1. 1. Qingdao Haier Smart Kitchen Appliance Co., Ltd. Qingdao 266100;
    2. State Key Laboratory of Digital Household Appliances Qingdao 266100
  • Published:2021-12-22

摘要: 由于现有吸油烟机采用可控硅调光,当调低LED灯亮度后,存在灯光偶然闪烁现象,且在用户使用照明灯时突发出现,影响用户使用体验,使用户对产品产生担忧。通过理论分析和实验验证的手段对交流照明灯调光控制电路进行了优化,有效地降低了照明灯低亮度时的电压阶跃,使得频闪现象无法被感知。

关键词: 可控硅, 频闪, 阶跃

Abstract: Due to the existing range hood using SCR dimming, when the brightness of the LED lamp is lowered, there is occasional flicker of light phenomenon. Because the stroboscopic flash appears suddenly when the user uses the lamp, it affects the user's experience and causes the user to worry about the product. The dimming control circuit of AC floodlight is optimized by means of theoretical analysis and experimental verification, which can effectively reduce the voltage step of the floodlight at low brightness, so that the stroboscopic phenomenon cannot be perceived.

Key words: SCR, Stroboscopic, Step

中图分类号: