家电科技 ›› 2025, Vol. 0 ›› Issue (zk): 466-471.doi: 10.19784/j.cnki.issn1672-0172.2025.99.097

• 第五部分 材料与零部件 • 上一篇    下一篇

基于5 mm铜管冷凝器的空调器在宽温域运行的性能表现实验研究

余海兵1,2, 李林1,2, 苏楚洲1,2, 邹海如1,2, 吕根贵1,2   

  1. 1.海信(广东)空调有限公司 广东江门 529051;
    2.海信家电集团股份有限公司 广东佛山 538300
  • 发布日期:2025-12-30
  • 作者简介:余海兵(1994—),男,硕士学位。研究方向:强化换热,高效换热器,制冷系统优化。E-mail:1520009441@qq.com。

Experimental study on the performance of air conditioners with 5 mm copper tube condensers operating in a wide temperature range

YU Haibing1,2, LI Lin1,2, SU Chuzhou1,2, ZOU Hairu1,2, LV gengui1,2   

  1. 1. Hisense (Guangdong) Air Conditioning Co., Ltd. Jiangmen 529051;
    2. Hisense Home Appliances Group Co., Ltd. Foshan 538300
  • Published:2025-12-30

摘要: 通过对5 mm铜管双排冷凝器五进五出流路、六进六出流路、八进八出流路此三种流路方案在空调器整机上的表现进行对比实验研究,结果表明5 mm铜管双排冷凝器六进六出流路方案在室外环温从35 ℃~60 ℃宽温域区间运行时能力、能效表现情况最佳,整机系统高压力最低,高、低压力间的差值最小,整机运行可靠性最好,该方案冷凝器在不同工况下运行时各流路出口温度方差最小,分流最均匀为三种流路方案中最佳的流路方案。通过与原型机方案进行对比实验测试发现5 mm铜管双排冷凝器方案能完全替代原型机7 mm铜管双排冷凝器方案,与此同时该方案可拓展至多机型进行产品开发使用,可降低约6%的整机成本,减少整机制冷剂使用量高达26%,在保障产品质量的同时,还能实现降本、降碳助力国家双碳战略目标。

关键词: 5 mm铜管, 空调器, 换热器, 冷凝器分流, 流路优化

Abstract: Through comparative experimental research on the performance of three flow path schemes of 5 mm copper tube double-row condensers, namely five-in-five-out, six-in-six-out, and eight-in-eight-out, in the air conditioner as a whole, the results show that the six-in-six-out flow path scheme of the 5 mm copper tube double-row condenser has the best performance in terms of capacity and energy efficiency when operating in a wide temperature range of outdoor ambient temperature from 35 ℃ to 60 ℃. The high pressure of the entire system is the lowest, the difference between high and low pressure is the smallest, and the operation reliability of the entire system is the best. The variance of the outlet temperature of each flow path of the condenser under different working conditions is the smallest, and the flow is the most uniform. Therefore, this scheme is the best flow path among the three flow path schemes. Through comparative experiments and tests with the prototype solution, it was found that the 5 mm copper tube double-row condenser solution can completely replace the 7 mm copper tube double-row condenser solution of the prototype. At the same time, this solution can be extended to multiple models for product development and use, which can reduce the overall machine cost by about 6% and decrease the refrigerant usage of the entire machine by up to 26%. While ensuring product quality, It can also achieve cost reduction and carbon emission reduction, contributing to the country’s dual carbon strategic goals.

Key words: 5 mm copper tube, Air conditioner, Heat exchanger, Condenser diversion, Flow path optimization

中图分类号: