冰箱门封技术现状与研究进展

doi:10.19784/j.cnki.issn1672-0172.2019.06.007

摘要/Abstract

摘要： 门封漏热约占冰箱总热负荷15%,其密封和绝热性能对冰箱的制冷效果和运行能耗产生较大影响。本文讨论了门封的发展趋势、传热传质、材料配方和结构优化研究现状,可为同行开展门封领域的研究提供参考。根据文献资料,常采用CFD技术和反向热平衡测试（RHLM）获取门封传热量,而传质测试一般采用示踪气体技术和对冷凝水的收集。门封材料配方是影响其抗迁移性和力学性能的重要因素。同时,为了提高密封和绝热性能,门封从基础的平直结构逐步优化成适应不同场合的复杂多飞边、多气囊结构。

关键词: 冰箱门封, 传热传质, 材料配方, 结构优化, 密封

Abstract: The heat leakage through gasket accounts for 15% of the total heat leakage of refrigerator. Its sealing and thermal insulation properties have a large influence on refrigeration effect and energy consumption of a refrigerator. Development trend, heat and mass transfer, material formulation and structure optimization are discussed in this paper, which is expected to provide guideline for researchers in the field of gasket. According to the literatures, the CFD technology and Reverse Heat Loss Method (RHLM) are often used to evaluate heat leakage of gasket, while mass transfer load mostly adopt tracer gas technology and collection of condensate. Material formulation is the key factor to determine the migration resistance and mechanical properties. In order to improve the sealing and thermal insulation properties, gasket is gradually optimized from a straight structure to a complex multi-edges and multi-air cells structure adapted to the characteristics of different application.

Key words: Refrigerator gasket, Heat and mass transfer, Material formula, Structural optimization, Seal

刘国强, 晏刚, 汪昌勇, 刘朋, 陈林, 李双生. 冰箱门封技术现状与研究进展[J]. 家电科技, 2019, 0(6): 58-63.

LIU Guoqiang, YAN Gang, WANG Changyong, LIU Peng, CHEN Lin, LI Shuangsheng. Current technology situation and research progress of refrigerator gasket[J]. Journal of Appliance Science & Technology, 2019, 0(6): 58-63.

参考文献

[1] 吴业正. 小型制冷装置设计指导[M]. 机械工业出版社, 1998: 230-232.
[2] Griffith B, Arasteh D, Turler D.Energy efficiency improvements for refrigerator/freezers using prototype doors containing gas-filled panel insulating systems[C]. Proceedings of the 46th International Appliance Technical Conference. Berkeley, USA, 1995.
[3] Soylemez E, Alpman E, Onat A, et al.Numerical (CFD) and experimental analysis of hybrid household refrigerator including thermoelectric and vapour compression cooling systems[J]. International Journal Refrigeration, 2019, 99: 300-315.
[4] Boughton. An investigation of household refrigerator cabinet loads[J]. HVAC&R Research, 1996, 3(2): 135-148.
[5] Ozisik M N.Heat conduction[M]. Wiley-Interscience Publishing, 1980.
[6] Guadalupe H, Fabrisio G, Miguel P, et al.Evaluation of refrigerator/freezer gaskets thermal loads[J]. HVAC&R Research, 2011, 17(2): 133-143.
[7] Kim H S, Sim J S, Ha J S .A study of the heat transfer characteristics near the magnetic door gasket of a refrigerator[J]. International Communications in Heat & Mass Transfer, 2011, 38(9): 1226-1231.
[8] Yan G, Chen Q, Sun Z.Numerical and experimental study on heat transfer characteristic and thermal load of the freezer gasket in frost-free refrigerators[J]. International Journal of Refrigeration, 2016, 63: 25-36.
[9] Chen Q, Yan G, Sun Z.Simulation and experimental study on gaskets heat transfer characteristics in the mullion region of frost-free refrigerators[C]. ACRA 2016-8th Asian Conference on Refrigeration and Air-Conditioning. Taipei, TAIWAN, 2016.
[10] Gao F, Naini S S, Wagner J, et al.An experimental and numerical study of refrigerator heat leakage at the gasket region[J]. International Journal of Refrigeration, 2017, 73(1): 99-110.
[11] Ghassemi M.Effects of gasket heat gain and an alternative refrigerant on refrigerator/freezer performance[D]. Iowa State University, 1993.
[12] Hessami M A.Calculating energy rating of domestic refrigerators through laboratory heat transfer measurements and computer simulations[R]. International Network for Information on Ventilation and Energy Performance, 1997.
[13] Melo C, Silva L W D, Pereira R H. Experimental evaluation of the heat transfer through the walls of household refrigerators[C]. Eighth International Refrigeration and Air Conditioning Conference. West Lafayette, 2000: 353-360.
[14] Tao W H, Sun J Y.Simulation and experimental study on the air flow and heat loads of different refrigerator cabinet design[J]. Chemical Engineering Communications, 2001, 186: 171-182.
[15] Thiessen S, Knabben FT, Melo C.Experimental evaluation of the heat fluxes through the walls of a domestic refrigerator[C].15th Brazilian Congress of Thermal Sciences and Engineering. Belem, 2014: 1-8.
[16] Hessami M A, Hilligweg A.Energy efficient refrigerators: The effect of door gasket and wall insulation on heat transfer[C]. ASME International Mechanical Engineering Congress. Washington D.C, 2003: 57-64.
[17] Inan C, Egrican N, Bullard C, et al.Moisture transport in domestic refrigerator[J]. ASHRAE Transaction, 2002, 108: 801-806.
[18] Xia G, Zhao D, Ding G, et al.A model for predicting air permeation between temperature-fluctuated refrigerated room and ambience through magnetic seal[J]. International Journal of Refrigeration, 2018, 91(7): 1-11.
[19] Afonso C, Castro M.Air infiltration in domestic refrigerators: The influence of the magnetic seals conservation[J]. International Journal of Refrigeration, 2010, 33(4): 856-867.
[20] Tan H S, Song X Z, Zhang Y, et al.The mass and heat transfer process through the door seal of refrigeration[J]. Chinese Journal of Chemical Engineering, 2017, 25(8): 955-964.
[21] Pereria P D V, Sgrott A, Back L F, et al. A methodology to measure the rates of air infiltration into refrigerated compartments[J]. International Journal of Refrigeration, 2019, 97: 88-96.
[22] Stein M A, Iran C, Bullard C, et al.Closed door moisture transport in refrigerator/freezers[J]. International Journal of Energy Research, 2002, 26(9): 793-805.
[23] Saidur R, Sattar M A, Hasanuzzaman M, et al.Open and closed door moisture transport and corresponding energy consumption in household refrigerator[J]. Journal of Energy & Environment, 2007, 6(5): 18-27.
[24] Hasanuzzaman M, Saidur R, Masjuki. H H.Moisture transfer and energy losses of household refrigerator-freezer during the closed door operation[J]. International Journal of Mechanical and Materials Engineering, 2008, 1(2): 18-27.
[25] 李代珍, 雷莉, 周俊. 软质PVC/NBR共混材料改善电冰箱门封的低温弹性[J]. 中国塑料, 2000, 14(08): 62-65.
[26] 夏振华. 高性能冰箱门封条用PVC粒料的制备[J]. 聚氯乙烯, 2010, 38(9): 28-30.
[27] 何俊, 吕正光, 严桃, 等. 冰箱门封条用PVC增塑剂性能的研究[C]. 中国家用电器技术大会,宁波, 2014.
[28] Westphalen D, Manager S.Application of best industry practices to the design of efficient commercial refrigerators[C]. International Refrigeration and Air Conditioning Conference. West Lafayette, 2002: 612-620.
[29] Merla A, Ferrante P P, Mentasti M G. Gasket for refrigerator cabinets with high heat insulation properties: Italy Patent 2006079650; 2006 August 3.
[30] Jun Y S. Profile gasket and its material composition properties: Italy Patent 2004033974; 2004 April 22.
[31] Paolo C, Marco D G. Double-seal gasket for refrigerator cabinets with high heat insulation properties: US Patent US 2008240091; 2012 August.