国内房间空调器拆解研究及浅析

doi:10.19784/j.cnki.issn1672-0172.2021.03.016

Abstract

Abstract: At present, there are many manufacturers and product types of room air conditioners in China. Due to the different market positioning of manufacturers and products, the performance and energy efficiency of air conditioners at different prices show obvious differences. In order to analyze the reasons for the differences between different products and the specific composition of product parts, three models of air conditioners with different prices and different energy efficiency grades of two domestic large-scale air-conditioner enterprises were disassembled, and the parameters of indoor and outdoor heat exchangers,electrical components and fans were compared, and the impact of the differences was briefly analyzed according to the experimental test data. This study is helpful for the researchers of china to have a better understanding of the parameters of air conditioner parts and the influence of parts changes on the whole machine, so as to guide the development of new products.

Key words: Air conditioner, Disassemble, Performance, Heat exchanger, Fan, Circuit board

CLC Number:

ZHAO Yang, WANG Chao, SHI Liming, LI Qiaohong. Research and analysis of domestic room air conditioner disassembly[J]. Journal of Appliance Science & Technology, 2021, 0(3): 90-94.

[1]	. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 32 -33 .
[2]	. [J]. Journal of Appliance Science & Technology, 2019, 0(1): 40 -41 .
[3]	WEI Bangfu, TIAN Yaming, KE Qingdi, XIE Min. Composite strength model andkey structureoptimization design of refrigerator door[J]. Journal of Appliance Science & Technology, 2019, 0(1): 92 -95 .
[4]	DING Kui, LIANG Yande. Analysis on common abnormal noise of air conditioners and its solutions[J]. Journal of Appliance Science & Technology, 2019, 0(2): 86 -89 .
[5]	LIANG Quan, LV Peishi, XU Liang, LIU Xiujiao. Vibration optimization design for heat pump dryer pipeline system[J]. Journal of Appliance Science & Technology, 2019, 0(2): 50 -53 .
[6]	CHEN Xing, YAN Maosong, FAN Qiang, WANG Wei, MA Gang. Optimized design of acoustic metamaterial sub-wavelength sound absorptive structure[J]. Journal of Appliance Science & Technology, 2019, 0(2): 74 -77 .
[7]	. [J]. Journal of Appliance Science & Technology, 2019, 0(2): 10 -15 .
[8]	. [J]. Journal of Appliance Science & Technology, 2019, 0(2): 30 -35 .
[9]	. [J]. Journal of Appliance Science & Technology, 2019, 0(3): 10 -11 .
[10]	. [J]. Journal of Appliance Science & Technology, 2019, 0(3): 29 .

[1]	MAO Yuehui, WEN Hao. Design and application of a new recognition module based on domestic voice chip [J]. Journal of Appliance Science & Technology, 2021, 0(3): 50-55.
[2]	LI Xin, ZHAO Yang, XU Huabao, ZHANG Jianxiong. Experimental study on compressor inverter circuit board fault [J]. Journal of Appliance Science & Technology, 2021, 0(3): 66-71.
[3]	LIN Yongzhi, YANG Wei, LIU Donghai. Research on the design of the Air Purifier ventilator based on Flow Simulation [J]. Journal of Appliance Science & Technology, 2021, 0(3): 72-77.
[4]	CHEN Zhiwei, CHEN Yingqiang. Research on influence of axial fit size between axial flow fan blade and guide ring of outdoor unit of air conditioner [J]. Journal of Appliance Science & Technology, 2021, 0(3): 78-81.
[5]	SHI Qingqing, LAI Zefeng, HUANG Yue, SUI Min, YUAN Yaogang, YANG Weibiao. Control of key performance and reliability of air conditioner by endoscope [J]. Journal of Appliance Science & Technology, 2021, 0(3): 106-111.
[6]	CHEN Jieming, ZHU Jixing, PI Xiaochun, WANG Liren. Comparison of performance test standards for drinking water treatment units [J]. Journal of Appliance Science & Technology, 2021, 0(2): 72-77.
[7]	CHEN Rongjian, GENG Shuaikai. Discussion on energy saving technology and energy saving grade division of room air conditioner laboratory [J]. Journal of Appliance Science & Technology, 2021, 0(2): 100-103.
[8]	ZHANG Yongliang, SUI Min. Optimizing the uniformity of air-conditioning performance by assembly clearance of rolling piston compressor [J]. Journal of Appliance Science & Technology, 2021, 0(2): 116-119.
[9]	DENG Yang, TANG Xiangwei, SUN Yanjun. Study on temperature field uniformity of a dual fan convection oven [J]. Journal of Appliance Science & Technology, 2021, 0(1): 40-43.
[10]	CHEN Xuebin, ZHAO Yini, MA Yuexin, CAI Xujie, MA Lie. Experimental and numerical study of pioneer air conditioner at normal mode and low-drought mode [J]. Journal of Appliance Science & Technology, 2021, 0(1): 50-55.
[11]	ZHANG Ziqi, WU Xiaoli, YANG Shuang, PAN Quan. Analysis of GB/T 25127-2020 series standards "Low ambient temperature air source heat pump (water chilling) packages" [J]. Journal of Appliance Science & Technology, 2021, 0(1): 68-72.
[12]	DENG Zanhui CHEN Duanxiang HU Yingming LIU Linyun. TOX multipoint connection technology for back sheet metal processing of cabinet air conditioner [J]. Journal of Appliance Science & Technology, 2021, 0(1): 92-95.
[13]	MA Lingqing, LI Yunxi, HAO Yumi, WEN Bo, WANG Mingxian. A study on light-aging resistance of air conditioner white panel materials of ABS [J]. Journal of Appliance Science & Technology, 2021, 0(1): 110-113.
[14]	XIAO Hansong, YANG Zixu, SHI Jingfeng, CAO Fali, SHI Wenxing. Discussion on individual measurement for variable refrigerant flow system [J]. Journal of Appliance Science & Technology, 2020, 0(zk): 2-6.
[15]	GONG Ying, CHEN Shouhai, CHEN Shenghua, WANG Hongchao, XU Hongxiang, WANG Tie. Analysis and experimental research on the problems of the lubricating oil and refrigerants return of the household air conditioner [J]. Journal of Appliance Science & Technology, 2020, 0(zk): 15-18.

Research and analysis of domestic room air conditioner disassembly

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Metrics

Comments

Recommended 10