某烹饪器具抽屉结构拉出过程仿真分析与实验验证

doi:10.19784/j.cnki.issn1672-0172.2020.03.013

Abstract

Abstract: Simulation analysis of the drag force of the drawer structure and the maximum stress of the buckle in the pull-out process. The pull-out force of the drawer structure and the stress concentration position of the buckle in the actual situation are predicted. In order to improve the accuracy as much as possible, the model is not simplified. The simulation results are tested to compare the difference between simulation results and experimental values. The experimental method is to measure the drag force with a tension meter. According to the feedback of the test results, it can be concluded that the simulation results are close to the experimental values. This indicates that the simulation method can be used as a design method.

Key words: Drawer, Buckle, Stress, Simulation, No simplified model, Experiment

CLC Number:

TM925

ZHOU Weiru, MO Yuanzhong, ZHU Lishan, WAN Bochen. Simulation analysis and experimental verification of the drawer pull out process about cooking appliance[J]. Journal of Appliance Science & Technology, 2020, 0(3): 87-91.

[1]	. [J]. Journal of Appliance Science & Technology, 2019, 0(2): 122 -123 .
[2]	. [J]. Journal of Appliance Science & Technology, 2019, 0(2): 28 -29 .
[3]	. [J]. Journal of Appliance Science & Technology, 2019, 0(2): 36 -39 .
[4]	. [J]. Journal of Appliance Science & Technology, 2019, 0(3): 10 -11 .
[5]	. [J]. Journal of Appliance Science & Technology, 2019, 0(3): 26 -27 .
[6]	. [J]. Journal of Appliance Science & Technology, 2019, 0(3): 29 .
[7]	. [J]. Journal of Appliance Science & Technology, 2019, 0(3): 30 -31 .
[8]	REN Meng, ZUO Qiujie. Study on application of high voltage electrostatic technology in wine cooler[J]. Journal of Appliance Science & Technology, 2019, 0(3): 70 -71 .
[9]	LV Peishi, Liu Zunan, Liu Yunfeng. Research and application of waterless washing technology between inner and outer barrels[J]. Journal of Appliance Science & Technology, 2019, 0(3): 118 -121 .
[10]	. [J]. Journal of Appliance Science & Technology, 2019, 0(3): 122 -125 .

[1]	SUN Jinglong, DING Longhui, PAN Yiguang, ZHANG Haipeng, QI Congshan. Research on noise reduction of refrigerator based on composite sound absorbtion structure [J]. Journal of Appliance Science & Technology, 2020, 0(3): 49-51.
[2]	MA Xinqiang, LIN Jian, ZHANG Su, GONG Chun, CHENG Jiefeng. Research on the electromagnetic noise mechanism and vibration noise control of microwave oven [J]. Journal of Appliance Science & Technology, 2020, 0(3): 52-55.
[3]	JIA Zhiqiang, LIU Huan, JIANG Jiwu. Finite element analysis of disinfection cabinet lifting mechanism based on ANSYS [J]. Journal of Appliance Science & Technology, 2020, 0(2): 56-61.
[4]	ZHANG Xianling. Research and application of cetol6σ tolerance simulation analysis software in structural design and process design of household air conditioning [J]. Journal of Appliance Science & Technology, 2020, 0(1): 108-112.
[5]	JIA Zhiqiang, LIU Huan, JIANG Jiwu. Dynamic simulation and analysis of lifting mechanism of disinfection cabinet shelf based on ADAMS [J]. Journal of Appliance Science & Technology, 2020, 0(1): 113-117.
[6]	QIU Wenhui, ZHANG Hao, ZHAO Qiang, ZHANG Ruicheng, YOU Bin. Excess stress analysis for pipes in air-conditioner on shutdown based on modal analysis [J]. Journal of Appliance Science & Technology, 2019, 0(6): 64-68.
[7]	CUI Peipei, WANG Yao, TIAN Yaming. A study on the leakage characteristics of frost-free refrigerator cabinet gasket [J]. Journal of Appliance Science & Technology, 2019, 0(6): 80-84.
[8]	WEI Mingtang, CHANG Jianhu, REN Wei, WANG Haibo, CHENG Wang, LI Haike. Research on deformation optimization of refrigerator bottom beam falling based on CAE technology [J]. Journal of Appliance Science & Technology, 2019, 0(6): 109-111.
[9]	ZHANG Guohui. The solution to the problem of low air volume in a wall-mounted air conditioning [J]. Journal of Appliance Science & Technology, 2019, 0(5): 64-67.
[10]	FAN Jianjun, CHANG Jianhu, REN Wei, WANG Haibo. Dropping simulation analysis of refrigerator and optimization of packaging structure [J]. Journal of Appliance Science & Technology, 2019, 0(5): 86-89.
[11]	LI Wenming, YU Lei, XIN Pengpeng, SHEN Lijun. Research on design optimization of flat filter bottle based on FEA technology [J]. Journal of Appliance Science & Technology, 2019, 0(5): 124-127.
[12]	ZHOU Dan. Research on reliability design method of high speed motor [J]. Journal of Appliance Science & Technology, 2019, 0(4): 50-53.
[13]	LI Qiankun, KE Qingdi, TIAN Yaming, SHANG Songbai. Simulation method of fridge door foaming process based on CFD [J]. Journal of Appliance Science & Technology, 2019, 0(3): 82-84.
[14]	YIN Xiaoying, XU Zhiteng, LI Yingshu, WANG Yongtao. Research on noise reduction of centrifugal fan for window machine air conditioner based on STAR-CCM+ [J]. Journal of Appliance Science & Technology, 2019, 0(2): 46-49.
[15]	DENG Xiangtao, WANG Liya, JIANG Jun, LI Yuting, REN Wei. The analysis and optimization of resonance problem in mechanical room of refrigerator [J]. Journal of Appliance Science & Technology, 2019, 0(2): 78-80.

Simulation analysis and experimental verification of the drawer pull out process about cooking appliance

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Metrics

Comments

Recommended 10