不同形式叶片前掠对轴流风机性能的影响

doi:10.19784/j.cnki.issn1672-0172.2022.99.035

摘要/Abstract

摘要： 主要基于CFD方法研究了不同形式的叶片前掠对轴流风机性能的影响。首先,对轴流风机进行了叶片前掠设计,提出了整体前掠和中部前掠两种叶片前掠方法。而后,基于数值模拟方法,对两种前掠形式的叶片与原型叶片进行了气动性能的计算和对比分析。最后,提取了叶轮流场的局部欧拉压头和叶片载荷,对叶片前掠的气动影响机理进行了分析。结果表明,叶片中部前掠可提高轴流风机叶轮设计流量点的气动性能,并保持全流量范围内较佳的气动性能;在设计流量点,叶片中部前掠使得轴流风机叶轮叶顶处的叶片载荷更趋集中于前部,有利于抑制叶轮的叶顶泄漏,进而提高风机的效率。

关键词: 叶片掠形, 轴流风机, 局部欧拉压头, 叶片载荷

Abstract: The effect of different forms of blade forward stacking on the performance of axial-flow fan is investigated by CFD method. Firstly, the blade forward stacking condition of an axial-flow fan is designed. Two forms of forward stacking blade, the forward overall-stacking blade and forward mid-stacking blade are proposed. Based on the numerical simulation method, the aerodynamic performance of these two forms of forward stacking blade and baseline blade is calculated and compared. The local Euler head (LEH) and blade loading in the flow field of impeller are extracted to reveal the mechanism of these effects of forward blade stacking on aerodynamic performance. The results show that, the blade forward mid-staking could improve the aerodynamic performance of axial-flow fan at the design flow rate and maintain that over the whole flow rate range. At the design flow rate, the blade forward mid-staking makes the blade loading at the impeller tip of axial-flow fan more concentrated in the front part, which is benefit to suppressing the tip leakage of impeller and improve the efficiency of fan.

Key words: Blade stacking, Axial-flow fan, Local Euler head, Blade loading

中图分类号:

TH432.1

陈鑫, 陈千一, 江俊, 曹继来, 王利亚. 不同形式叶片前掠对轴流风机性能的影响[J]. 家电科技, 2022, 0(zk): 162-166.

CHEN Xin, CHEN Qianyi, JIANG Jun, CAO Jilai, WANG Liya. Effect of the different forms of blade forward stacking on the performance of axial-flow fan[J]. Journal of Appliance Science & Technology, 2022, 0(zk): 162-166.

参考文献

[1] K. S. Lee, K. Y. Kim, A. Samad.Design optimization of low-speed axial flow fan blade with three-dimensional RANS analysis[J]. Journal of Mechanical Science and Technology, 2010, 22(10): 1864-1869.
[2] Y. Li, H. Ouyang, Z. Du.Optimization design and experimental study of low-pressure axial fan with forward-skewed blades[J]. International Journal of Rotating Machinery, 2007(01): 10.
[3] J. H. Kim, J. H. Choi, A. Husain, K. Y. Kim.Performance enhancement of axial fan blade through multi-objective optimization techniques[J]. Journal of Mechanical Science and Technology, 2010, 24(10): 2059-2066.
[4] J. H. Kim, J. W. Kim, K. Y. Kim.Axial-flow ventilation fan design through multi-objective optimization to enhance aerodynamic performance[J]. ASME. J. Fluids Eng, 2011, 133(10): 1076-1081.
[5] K. Bamberger, T. Carolus.Optimization of axial fans with highly swept blades with respect to losses and noise reduction[J]. Noise Control Engineering Journal, 2012, 60(06): 716-725.
[6] J. Hurault, S. Kouidri, F. Bakir, R. Rey.Experimental and numerical study of the sweep effect on three-dimensional flow downstream of axial flow fans[J]. Flow Measurement & Instrumentation, 2010, 21(02): 155-165.
[7] L. Zhang, Y. Jin, Y. Jin.An investigation on the effects of irregular airfoils on the aerodynamic performance of small axial flow fans[J]. Journal of Mechanical Science and Technology, 2013, 27(06): 1677-1685.
[8] A. N. İlikan, E. Ayder.Influence of dihedral stacking on the performance of an axial fan[J]. Engineering Applications of Computational Fluid Mechanics, 2015, 8(04): 518-529.
[9] G. Jin, H. Ouyang, Y. Wu, Z. Du.Experimental and numerical investigations of the tip leakage flow of axial fans with circumferential skewed blades under off-design conditions[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2010, 224(06): 1203-1216.
[10] G. Jin, H. Ouyang, Z. Du.Experimental investigation of unsteady flow in axial skewed fans according to flow rates[J]. Experimental Thermal & Fluid Science, 2013, 48(03): 81-96.
[11] 裴越. 基于CFD的超高速轴流风机气动噪声降噪优化设计[D]. 成都: 电子科技大学, 2021.
[12] 李优. 弯/斜叶片对轴流风机性能和噪声影响的数值研究[D]. 北京: 华北电力大学, 2021.
[13] 黄美玲. 贯流风叶叶片变形对噪声的影响及其控制[J]. 家电科技, 2010(05): 70-72.
[14] X. Chen, L. Cao, P. Yan, P. Wu, D. Wu.Effect of meridional shape on performance of axial-flow fan[J]. Journal of Mechanical Science and Technology, 2017, 31(11): 5141-5151.
[15] M. Zangeneh, A. Goto, H. Harada.On the design crite-ria for suppression of secondary flows in centrifugal and mixed flow impellers[J]. ASME. J. Turbomach, 1998, 120(04): 723-735.
[16] A. C. Huang, E. M. Greitzer, C. S. Tan.Blade loading effects on axial turbine tip leakage vortex dynamics and loss[J]. ASME. J. Turbomach, 2012, 135(05): 1053-1067.