家电科技 ›› 2025, Vol. 0 ›› Issue (zk): 228-232.doi: 10.19784/j.cnki.issn1672-0172.2025.99.047

• 第二部分 制冷与空调 • 上一篇    下一篇

渐进式压缩技术在低温空气源热泵系统的应用研究

吴飞1,2, 陈磊1,2, 廖四清1,2   

  1. 1.广东美芝制冷设备有限公司 广东佛山 528333;
    2.美的集团股份有限公司 广东佛山 528333
  • 发布日期:2025-12-30
  • 作者简介:吴飞,硕士学位。研究方向:制冷空调及压缩机。地址:广东省佛山市顺德区大良南霞路1号广东美芝制冷设备有限公司。E-mail:394083232@qq.com。

Research on the application of progressive compression technology in low-temperature air source heat pump systems

WU Fei1,2, CHEN Lei1,2, LIAO Siqing1,2   

  1. 1. Guang Dong Mei Zhi Compressor Co., Ltd. Foshan 528333;
    2. Midea Group Co., Ltd. Foshan 528333
  • Published:2025-12-30

摘要: 主要研究了渐进式压缩技术在低温空气源热泵系统中的应用,分析了渐进式压缩的技术特点以及优势工况,并在对配置有经济器的渐进式压缩中间喷气系统的热力学分析基础上,进行了压缩设计计算。确定了选定工况条件下,渐进式压缩的最优中间压力和容积比(高压级气缸容积/低压气缸容积),同时也核算了等熵效率对渐进式压缩参数设计的影响。最后,搭载系统进行测试,试验通过控制辅路膨胀阀开度来控制喷气状态,测试不同工况下,开喷气对系统性能的影响,验证了同工况下,系统性能随中间压力的变化趋势,并对比了渐进式压缩中间喷气与单级压缩中间喷气在不同工况下的提升潜力,为后续压缩机设计选型提供参考。

关键词: 渐进式压缩, 中间喷气, 最优中间压力, 容积比

Abstract: Investigates the application of progressive compression technology in low-temperature air-source heat pump systems. The technical characteristics and optimal operating conditions of progressive compression are analyzed. Based on thermodynamic analysis of an intermediate injection system with an economizer, the compression design is calculated. Under specified working conditions, the optimal intermediate pressure and volumetric ratio (high-pressure cylinder volume to low-pressure cylinder volume) are determined, and the influence of isentropic efficiency on the design parameters is evaluated. Finally, system tests are conducted by controlling the auxiliary expansion valve opening to regulate the injection state. The impact of injection on system performance under different conditions is examined, verifying the trend of system performance with intermediate pressure variation. A comparative analysis of the performance improvement potential between progressive compression with intermediate injection and single-stage compression with intermediate injection under various conditions is presented, providing a reference for future compressor design and selection.

Key words: Progressive compression, Intermediate vapor injection, Optimal intermediate pressure, Volume ratio

中图分类号: