燃气热水器点火传火性能分析及优化

doi:10.19784/j.cnki.issn1672-0172.2022.99.125

家电科技 ›› 2022, Vol. 0 ›› Issue (zk): 565-568.doi: 10.19784/j.cnki.issn1672-0172.2022.99.125

• 第四部分材料与零部件 • 上一篇下一篇

燃气热水器点火传火性能分析及优化

仝通通^1,3, 胡常青^1,3, 陈震霖², 何立模², 曹冠忠¹, 张洪烈^1,3

1.青岛经济技术开发区海尔热水器有限公司山东青岛 266101;
2.华中科技大学煤燃烧国家重点实验室湖北武汉 430074;
3.数字化家电国家重点实验室山东青岛 266101

发布日期:2023-03-28
作者简介:仝通通,硕士学位。研究方向：热水器研发。地址：青岛市崂山区海尔路1号海尔信息产业园。E-mail：tongtongtong@haier.com。

Analysis and optimization of ignition and fire transmission performance of gas water heater

TONG Tongtong^1,3, HU Changqing^1,3, CHEN Zhenlin², HE Limo², CAO Guanzhong¹, ZHANG Honglie^1,3

1. Qingdao Economic & Technology Development Zone Haier Water-Heater Co., Ltd. Qingdao 266101;
2. State Key Laboratory of coal combustion, Huazhong University of Science and Technology Wuhan 430074;
3. State Key Laboratory of Digital Household Appliances Qingdao 266101

Published:2023-03-28

摘要/Abstract

摘要： 为对燃气热水器产品A进行优化升级,将产品A与其他同类研发方案进行点火传火性能测试。对比分析产品A与其他研发方案在点火速度、传火速度和燃烧稳定性等方面的优劣,并根据测试结果对产品A的燃烧器进行优化。测试结果显示,燃气热水器产品A的点火时间最短,点火性能最好;传火性能方面,产品A传火时间较长,与其他方案相比并无明显优势。为对燃气热水器产品A进行优化,提出三种优化方案,并进行试验验证。结果显示增加3 mm传火片的方案最合理,可以明显提高产品A的传火性能,提高其产品竞争力。

关键词: 燃气热水器, 点火传火, 性能分析, 结构优化

Abstract: In order to upgrade the gas water heater product A, the ignition and fire transmission performance test of the product A and other similar research programs was carried out. Analyzing the advantages and disadvantages of product A and other research programs in terms of ignition speed, fire transfer speed and combustion stability. And optimize the burner of product A according to the test results. The test results show that the gas water heater product A has the shortest ignition time and the best ignition performance. In terms of fire transmission performance, product A has a longer fire transmission time and has no obvious advantage compared with other research programs. In order to optimize the gas water heater product A, three optimization schemes are proposed and verified by experiments. The results show that the plan of adding 3 mm fire-passing sheet is the most reasonable, which can significantly improve the fire transmission performance of product A and improve its product competitiveness.

Key words: Gas water heater, Ignition and fire transmission, Performance analysis, Structure optimization

中图分类号:

TS914.252

仝通通, 胡常青, 陈震霖, 何立模, 曹冠忠, 张洪烈. 燃气热水器点火传火性能分析及优化[J]. 家电科技, 2022, 0(zk): 565-568.

TONG Tongtong, HU Changqing, CHEN Zhenlin, HE Limo, CAO Guanzhong, ZHANG Honglie. Analysis and optimization of ignition and fire transmission performance of gas water heater[J]. Journal of Appliance Science & Technology, 2022, 0(zk): 565-568.

[1]	赵婷, 刘云, 范汇武, 王龙强, 刘金钊, 颜超, 毕三宝. 燃气热水器中燃烧器火焰摆动问题的分析与优化[J]. 家电科技, 2022, 0(zk): 521-526.
[2]	姚青梅, 胡亚欣, 焦利敏, 魏明然. 《智能家用电器的智能化技术燃气快速热水器的特殊要求》标准解读[J]. 家电科技, 2022, 0(zk): 754-756.
[3]	周之运, 陈康, 张学滨, 刘玉春, 李晓明. 滚筒洗衣机皮带轮轻量化的研究[J]. 家电科技, 2022, 0(5): 94-98.
[4]	赵婷, 王晔, 颜超, 范汇武. 基于CFD与实验协同研究的燃气热水器火排性能分析与优化[J]. 家电科技, 2021, 0(zk): 160-164.
[5]	杨芝明, 蔚鑫. 叉形三通冲压件可靠性能研究[J]. 家电科技, 2020, 0(4): 62-65.
[6]	刘国强, 晏刚, 汪昌勇, 刘朋, 陈林, 李双生. 冰箱门封技术现状与研究进展[J]. 家电科技, 2019, 0(6): 58-63.
[7]	韦明堂, 常见虎, 任伟, 王海波, 程旺, 李海科. 基于CAE技术的冰箱跌落底梁变形优化研究[J]. 家电科技, 2019, 0(6): 109-111.
[8]	田乐, 赵雪, 刘日超, 李翔. 洗碗机水流系统结构的优化设计研究[J]. 家电科技, 2019, 0(4): 108-111.
[9]	左攀, 李志逢. 一种快速热水的燃气热水器[J]. 家电科技, 2018, 0(8): 54-55.
[10]	朱连喜, 郑暾. 零冷水型家用燃气热水器设计原理及测试方案[J]. 家电科技, 2018, 0(2): 35-37.
[11]	王瑞娟, 郑涛, 李键, 冯青. 燃气热水器水路增压泵噪声的降低及研究[J]. 家电科技, 2018, 0(2): 58-63.

燃气热水器点火传火性能分析及优化

Analysis and optimization of ignition and fire transmission performance of gas water heater

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 11

Metrics

本文评价

推荐阅读 10