家电科技 ›› 2022, Vol. 0 ›› Issue (zk): 811-815.doi: 10.19784/j.cnki.issn1672-0172.2022.99.183

• 第七部分 标准分析与检测 • 上一篇    下一篇

蒙特卡洛法评定微波炉效率值不确定度研究

王伯燕1, 杨统乾1, 叶至壮1, 张立民1, 郭建2, 马颜1   

  1. 1.中家院(北京)检测认证有限公司 北京 100176;
    2.中国家用电器研究院 北京 100037
  • 发布日期:2023-03-28
  • 作者简介:王伯燕,学士学位。研究方向:生活家电检测、认证、新业务开发、技术标准方向研究。地址:北京市经济技术开发区博兴八路3号。E-mail:wangby@cheari.com。

Research on uncertainty of evaluating efficiency value of microwave oven by Monte Carlo method

WANG Boyan1, YANG Tongqian1, YE Zhizhuang1, ZHANG Limin1, GUO Jian2, MA Yan1   

  1. 1. CHEARI (Beijing) Certification & Testing Co., Ltd. Beijing 100176;
    2. China Household Electric Appliances Research Institute Beijing 100037
  • Published:2023-03-28

摘要: 随着微波炉产品的普及,人们开始关注微波炉的效率值,微波炉效率值测试过程复杂,受测试环境、仪器设备及人员操作等因素影响比较大。测量不确定度评定可以确定微波效率测试结果的影响因素,提高实验室的检测能力和测试的准确度。目前不确定度评定方法有GUM法和MCM法两种,同时采用这两种方法评定微波效率值测量不确定度,并对两种方法得到的结果进行比较验证,两种方法的测量不确定度结果基本一致。

关键词: 蒙特卡洛法, 微波炉, 效率值, 不确定度

Abstract: With the popularity of microwave oven products, people have begun to pay attention to the efficiency value of microwave ovens. The test process of microwave oven efficiency values is complicated and greatly affected by factors such as test environment, equipment and personnel operations. The measurement uncertainty evaluation can determine the influencing factors of the microwave efficiency test results, and improve the laboratory's detection ability and test accuracy. At present, there are two methods for uncertainty evaluation: GUM method and MCM method. These two methods are used to evaluate the uncertainty evaluation of microwave efficiency value measurement, and the results obtained by the two methods are compared and verified, and the two uncertainty results are basically consistent.

Key words: Monte Carlo method, Microwave ovens, Efficiency value, Uncertainty evaluation

中图分类号: